Abstract
Austenitisation is a mainstay of steel processing and is required to form strong microstructures, e.g., martensite. It is known that austenitisation can proceed by a two-step mechanism, which first involves a 'memory effect' that regenerates the original prior-austenite grains (PAGs), and second a recrystallisation step, which generates a new grain structure. However, the mechanisms of these processes are not fully understood, especially in low-alloy steels. Here, we use in-situ high-temperature electron backscatter diffraction and synchrotron X-ray diffraction to investigate austenitisation in two martensitic low-alloy steels. Both exhibited the memory effect, but only one subsequently recrystallised. The memory effect progressed by the growth of acicular austenite consistent with a mixed displacive/diffusive reaction. Growth of pre-existing retained austenite was unlikely to be responsible for the memory effect, as memory was observed in alloys without measurable retained austenite, and multiple variants of austenite nucleated within a PAG at the transformation start. The growth of the memory variant along martensite-martensite grain boundaries was favoured over other variants. Evidence strongly suggests that the driving force for the recrystallisation step is dominated by the dislocations generated during the transformation itself, and not by those inherited from martensite. The occurrence of recrystallisation is dependent on the competition between dislocation recovery and recrystallisation in memory orientation austenite, which is influenced by an alloy’s austenitisation temperature, and heating rates through austenitisation. This new understanding may enable improved heat treatment practices that exploit the two-step nature of the process to promote improved PAG.