A novel extrusion process for the production of polymer micropellets
- 30 March 2018
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 58 (12) , 2264-2275
Abstract
Traditional micropellet and powder‐based polymer processing techniques, such as powder bed fusion, compression molding, and rotational molding have shown an increased demand in polymer processing. These processes require powders and micropellets with a small particle size, narrow size distribution and defined geometry for a variety of polymer resins. Therefore, micropelletization technologies, where particles in the size range of 50–1,000 μm are generated, have been attracting growing attention over the past decade. A new technique, presented here, yields micropellets with a controlled morphology and narrow particle size distribution. In this process, a polymer melt is extruded through a capillary and is subsequently stretched with a hot airstream until flow instabilities or melt fracture cause it to break up into particles. Small changes in process conditions result in different size distributions and particle shapes, such as lenticular pellets, fibers, and strand segments. This work shows how processing parameters and different polymer materials influence the produced micropellets. Depending on the processed polymer resin and process conditions, spherical particles with sizes ranging from 50 to 1,000 μm can be produced using the novel extrusion technique. Comprehensive design of experiment and data analysis was used to establish a more detailed understanding of the micropelletization process. POLYM. ENG. SCI., 58:2264–2275, 2018. © 2018 Society of Plastics EngineersKeywords
This publication has 28 references indexed in Scilit:
- Rounding of Irregular Polymer Particles in a Downer ReactorProcedia Engineering, 2015
- Materials perspective of polymers for additive manufacturing with selective laser sinteringJournal of Materials Research, 2014
- A novel process route for the production of spherical LBM polymer powders with small size and good flowabilityPowder Technology, 2014
- Pelletizing your compound: what are your options?Plastics, Additives and Compounding, 2006
- Optimised technologies for cryogenic grindingInternational Journal of Mineral Processing, 2004
- Experiments and flow analysis of a micropelletizing diePolymer Engineering & Science, 2004
- Production of Fine Polymer Powder under Cryogenic ConditionsChemical Engineering & Technology, 2002
- Solid-State Shear Pulverization2001
- Fine grinding of polymers in a vibrated bead millPowder Technology, 1999
- Principles of rotational moldingPolymer Engineering & Science, 1972