Optimization through combined compromise solution and weight determination through SHANNON-ENTROPY for multi criteria decision making in tribological testing of ultrahigh molecular weight polyethylene nano-composite in SBF environment and compression testing with it’s invitro analysis
- 7 October 2024
- journal article
- research article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 38 (6) , 2253-2280
Abstract
Aluminium oxide and graphene reinforced with ultrahigh molecular weight polyethylene (UHMWPE) composites offer significant potential for prosthetic and implant applications due to their unique combination of properties. In this article, a series of aluminium oxide and graphene reinforced with ultrahigh molecular weight polyethylene (UHMWPE) composites were successfully fabricated through compression moulding. The average hardness of all the composites was observed to be higher than the UHMWPE (6.1 H v ). Composite U-15A-5 G was found to be the hardest with hardness of 10.5 H v owing to strong bond between Al 2 O 3 and UHMWPE. The compression strength of the U-15A-5 G material was about 81.936 MPa, which is 40.9% better than the pure UHMWPE. The compression modulus was about 330 MPa which is 22.2% higher than neat UHMWPE. Composite samples were tribo tested under simulated body fluid (SBF) lubricating environment. Using combined entropy-COCOSO method it was found that 50 mm/s speed, 200N load and 5% graphene are the optimum tribological parameters. with Cof of 0.04 and wear rate of 4.8745*10 −4 mm 3 /Nm. Microstructure analysis indicated that long-range structured lamellar structures and microfibers were created between the crystals with the assistance of graphene layers. Apatite layer was also found on the sample. The apatite layer included phosphate and carbonate ions, which is good for in vitro bioactivity on polymeric films. This composite is a good candidate for prosthetics and implant components.Keywords
This publication has 62 references indexed in Scilit:
- CoCoSo method-based optimization of cryogenic drilling on multi-walled carbon nanotubes reinforced compositesInternational Journal on Interactive Design and Manufacturing (IJIDeM), 2022
- RETRACTED ARTICLE: A Cluster-based Stratified Hybrid Decision Support Model under Uncertainty: Sustainable Healthcare Landfill Location SelectionApplied Intelligence, 2022
- Reduced Graphene Oxide (rGO)/ZrO 2 Reinforced Polyimide Nanocomposite Aerogels with Enhanced Properties: A Synergistic Effect of the NanofillersChemistrySelect, 2019
- Improved wear, mechanical, and biological behavior of UHMWPE-HAp-zirconia hybrid nanocomposites with a prospective application in total hip joint replacementJournal of Materials Science, 2018
- Functionality and Properties of Bio-based Materials2018
- Friction and wear properties of graphene oxide/ultrahigh‐molecular‐weight polyethylene composites under the lubrication of deionized water and normal saline solutionJournal of Applied Polymer Science, 2013
- Dental Alumina: Microstructure and Properties2013
- Tribological Behavior of UHMWPE Reinforced with Graphene Oxide NanosheetsTribology Letters, 2012
- Wear properties of 3‐aminopropyltriethoxysilane‐functionalized carbon nanotubes reinforced ultra high molecular weight polyethylene nanocompositesPolymer Engineering & Science, 2010
- Improvement of the tribological behavior of ultra‐high‐molecular‐weight polyethylene by incorporation of poly (phenyl p‐hydroxyzoate)Journal of Applied Polymer Science, 2005