Effects of NaCl, SO2, NH3, O3, and ultraviolet light on atmospheric corrosion of Zn
- 5 August 2019
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 71 (1) , 9-20
Abstract
The atmospheric corrosion behavior of Zn was studied in laboratory environments containing constituents that have not previously received much attention, in particular, humidity, SO2, NH 3, and O 3, along with ultraviolet (UV) light irradiation and a preloading of NaCl. After exposure, corrosion rates were measured using mass loss, and corrosion products were identified by X‐ray diffraction, Fourier transform‐infrared spectroscopy, and energy dispersive spectroscopy. In this study, UV light and O 3 did not significantly affect the Zn corrosion rate in the absence of Cl −. However, when NaCl was present, UV light inhibited the Zn corrosion rate below 90% relative humidity (RH) and accelerated the Zn corrosion rate at 99% RH. The presence of UV light also increased the formation of zinc hydroxyl sulfate and gordaite when exposed to 120 parts per billion (ppb) SO 2 and NaCl. The combination of SO 2 and O 3 with the preloading of NaCl increased the corrosion rate of Zn compared with NaCl alone. NH 3 at a concentration of 550 ppb did not have a significant effect on the Zn corrosion rate.Keywords
Funding Information
- US Office of Secretary of Defense, Technical Corrosion Collaboration (FA7000-12-2-0015)
This publication has 20 references indexed in Scilit:
- Atmospheric Corrosion of Cu during Constant Deposition of NaClJournal of the Electrochemical Society, 2013
- Photo-Corrosion of Different Metals during Long-Term Exposure to Ultraviolet LightCorrosion, 2003
- Atmospheric Corrosion2003
- The Role of Carbon Dioxide in the Atmospheric Corrosion of Zinc: A Laboratory StudyJournal of the Electrochemical Society, 1998
- Thermodynamic Properties of Aqueous Aerosols to High Supersaturation: I—Measurements of Water Activity of the System Na+−Cl−−NO−3−SO2−4−H2O at ~ 298.15 KAerosol Science and Technology, 1997
- A Laboratory Study of the Effect of Ozone, Nitrogen Dioxide, and Sulfur Dioxide on the Atmospheric Corrosion of ZincJournal of the Electrochemical Society, 1993
- Corrosion Mechanisms for Zinc Exposed to the AtmosphereJournal of the Electrochemical Society, 1989
- The Use of Photocurrents to Characterize Anodic Films on Ti, Zr, Cu, and 304 Stainless SteelJournal of the Electrochemical Society, 1987
- Sulfur Dioxide Reactions with Ammonia in Humid AirIndustrial & Engineering Chemistry Fundamentals, 1975
- Adsorbed oxygen species on zinc oxide in the dark and under illuminationThe Journal of Physical Chemistry, 1972