Effect of Post Deposition Annealing on the Sensing Properties of Thin Film Ruthenium Oxide (RuO₂) pH Sensor
- 4 March 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (8) , 12498-12503
Abstract
The use of Ruthenium Oxide (RuO2) as a pH sensor is a relatively novel idea and understanding how preparation of the sensor effects and its sensing properties is crucial. In this paper, the effect of annealing temperature on the sensing properties of the sputtered RuO 2 thin film pH sensor was examined. It was found that annealing RuO 2 at temperatures above 200 °C resulted in increased crystallinity and did not significantly alter the elemental composition. The sensor performance however was found to decrease with increased annealing temperature. Electrodes annealed above 400 °C had significantly higher hysteresis widths and drift rates, almost 10 times the values of electrodes annealed at below 400 °C. Electrodes annealed at temperatures below 400 °C exhibited acceptable hysteresis widths of less than 2.5 mV. Consequently, in the manufacture of functional RuO 2 pH sensors with a screen-printed Pt contact layer, it is recommended that the manufacturing temperature should not exceed 400 °C, post sputter deposition of RuO 2 .Keywords
This publication has 33 references indexed in Scilit:
- Sensing mechanism of RuO2–SnO2 thick film pH sensors studied by potentiometric method and electrochemical impedance spectroscopyJournal of Electroanalytical Chemistry, 2015
- Thin Titanium Nitride Films Deposited using DC Magnetron Sputtering used for Neural Stimulation and Sensing PurposesProcedia Engineering, 2012
- A series of naphthalimide derivatives as intra and extracellular pH sensorsBiomaterials, 2010
- Precious metal oxides for electrochemical energy converters: Pseudocapacitance and pH dependence of redox processesJournal of Power Sources, 2009
- Physical and electrochemical characterization of hydrous ruthenium oxide/ordered mesoporous carbon composites as supercapacitorMicroporous and Mesoporous Materials, 2007
- Sputtered thin-film pH electrodes of platinum, palladium, ruthenium, and iridium oxidesSensors and Actuators B: Chemical, 1995
- A solid-state pH sensor based on a Nafion-coated iridium oxide indicator electrode and a polymer-based silver chloride reference electrodeSensors and Actuators B: Chemical, 1994
- The role of buried OH sites in the response mechanism of inorganic-gate pH-sensitive ISFETsSensors and Actuators, 1984
- Electronic semiconducting oxides as pH sensorsSensors and Actuators, 1984
- pH-sensitive sputtered iridium oxide filmsSensors and Actuators, 1981