Interfacial improvement and mechanical properties of epoxy resin/ultra-high molecular weight polyethylene fibre composites compatibilized with glycidyl methacrylate
Authors:
- 26 July 2013
- journal article
- research article
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 32 (22) , 1675-1684
Abstract
In this paper, interfacial adhesion of epoxy resin/ultra-high molecular weight polyethylene fibre composites by polymerization grafting of glycidyl methacrylate onto fibre surface was investigated. To optimize the grafting process, experiment design method was applied using the time and monomer concentration as grafting variables. In order to confirm the formation of glycidyl methacrylate bonds onto the polyethylene chains, attenuated total reflectance-infra red test was performed. Besides, Pull-out test was utilized to measure the interfacial shear strength of fibres with the matrix for both modified and unmodified ultra-high molecular weight polyethylene fibre composites. Tensile test was carried out. Three amounts, 11%, 25%, and 40%, of polymerized glycidyl methacrylate grafted onto the fibre surface was obtained. The grafting percent of glycidyl methacrylate onto the fibre showed enhancement by increasing the amount of glycidyl methacrylate monomer and the reaction time which was bigger by monomer increment. The interfacial shear strength of 11%, 25%, and 40% glycidyl methacrylate grafted fibres with epoxy matrix showed 126%, 195%, and 220% enhancements, respectively, in comparison with untreated fibre. The tensile strength of 11% glycidyl methacrylate grafted polyethylene fibre-epoxy composite showed about 10% enhancement; however, the tensile strengths of 25% and 40% glycidyl methacrylate grated polyethylene fibre-epoxy composites showed decrement. Toughness results showed improvement for 11% glycidyl methacrylate grafted composite due to appearing of energy absorbing mechanisms while fracturing.Keywords
This publication has 29 references indexed in Scilit:
- Correlation of temperature dependences of macro- and micro-interfacial properties in carbon fiber/epoxy resin compositeJournal of Reinforced Plastics and Composites, 2012
- Thermal and impact study of PP/PET fibre composites compatibilized with Glycidyl Methacrylate and Maleic AnhydrideComposites Part B: Engineering, 2012
- Studies on Recyclable Nylon-reinforced PP Composites: Effect of Fiber DiameterJournal of Thermoplastic Composite Materials, 2009
- Investigation of styrene‐assisted free‐radical grafting of glycidyl methacrylate onto high‐density polyethylene using response surface methodJournal of Applied Polymer Science, 2008
- The Preparation and Study on UHMWPE/Epoxy Gel-Spun FibresAdvanced Materials Research, 2008
- SEM study of the morphologic change of high‐density polyethylene surface grafted with glycidyl methacrylateJournal of Applied Polymer Science, 2007
- Enzyme‐mediated grafting of acrylamide to ultrahigh molecular weight polyethylene fiber: A novel radical initiation systemJournal of Applied Polymer Science, 2005
- Ultrahigh‐molecular‐weight‐polyethylene‐fiber surface treatment by electron‐beam‐irradiation‐induced graft polymerization and its effect on adhesion in a styrene–butadiene rubber matrixJournal of Polymer Science Part B: Polymer Physics, 2004
- Void Content, Density and Weight Reduction Studies on Short Bamboo Fiber–Epoxy CompositesJournal of Reinforced Plastics and Composites, 2004
- Grafting of glycidyl methacrylate onto ethylene-propylene copolymer: Preparation and characterizationJournal of Applied Polymer Science, 1996