High-Performing Unitized Regenerative Fuel Cell Using PGM-Free Bifunctional Catalysts from Waste-Derived Carbon
Open Access
- 30 September 2026
- journal article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (40) , 61767-61780
Abstract
Unitized regenerative alkaline-exchange membrane fuel cells (UR-AEMFCs) are a promising technology for energy storage, attending to their ability to operate in both galvanic (FC) and electrolytic (WE) modes. However, their round-trip efficiency (RTE) is greatly dependent on the selected electrodes toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). As both mechanisms have slow kinetics, developing innovative and efficient bifunctional catalysts is critical to increasing UR-AEMFC performance. In this work, bifunctional precious group metal-free (PGM-free) catalysts were prepared by nucleating either Fe, Ni, or FeNi on nitrogen-doped carbons; the prepared catalysts have a maximum metal loading of up to 3 wt %. To align with circular economy principles, a sustainable approach was employed by using a phenolic resin-based waste product as a carbon precursor. The carbonization process, conducted in the presence of H3PO4 and melamine, yielded nitrogen-doped carbon supports with enhanced properties. Notably, in single-cell operation, the prepared PGM-free catalysts─NiNC, FeNC, and FeNiNC─generated RTEs of 29%, 38%, and 35%, respectively, under corrosion-free alkaline electrolytes (0.5 M KOH); similar results were reported for benchmark commercial catalysts such as IrO2, which displayed ca. 30% of RTE. Moreover, NiNC catalyst showed a half-wave potential of 0.74 V, an onset potential of 0.88 V, and an overpotential of 420 mV at 10 mA cm–2. In turn, the FeNC displayed a half-wave potential of 0.72 V, an onset potential of 0.90 V, and an overpotential of 510 mV at 10 mA cm–2. Regarding the FeNiNC, this catalyst demonstrates a half-wave potential of 0.76 V, an onset potential of 0.86 V, and an overpotential of 380 mV at 10 mA cm–2. These results are particularly noteworthy considering the significantly lower metal loadings in the produced PGM-free catalysts. Besides, to evaluate their long-term performance, the single cell was submitted to several potential cycles within the potential window range for FC and WE modes, i.e., between 0.6 and 2.0 V. The noble Pt/C catalysts deactivated completely after the stress test, while the novel FeNiNC and NiNC catalysts, containing an ultralow loading of critical raw materials (CRMs), demonstrated an outstanding compromise between activity and stability, proving their potential to be integrated in UR-AEMFC.Keywords
Funding Information
- Fundação para a Ciência e a Tecnologia (2023.07366.CEECIND/CP2834/CT0012)
- Fundação para a Ciência e a Tecnologia (LA/P/0045/2020)
- Fundação para a Ciência e a Tecnologia (SFRH/BD/144338/201)
- Fundação para a Ciência e a Tecnologia (SFRH/BD/145412/2019)
- Fundação para a Ciência e a Tecnologia (UID/00511/2025)
- Fundação para a Ciência e a Tecnologia (UID/PRR/00511/2025)
- European Regional Development Fund (POCI-01-0247-FEDER-046109)
This publication has 55 references indexed in Scilit:
- Hard carbon anodes derived from phenolic resin/sucrose cross‐linking network for high‐performance sodium‐ion batteriesBattery Energy, 2022
- Regenerative fuel cells2022
- Engineering local coordination environments and site densities for high‐performance Fe‐N‐C oxygen reduction reaction electrocatalysisSmartMat, 2021
- Nonprecious Metal Bifunctional Catalysts for Oxygen Electrocatalysis Using a Metal‐Organic FrameworkBulletin of the Korean Chemical Society, 2021
- Recent Progress on NiFe‐Based Electrocatalysts for the Oxygen Evolution ReactionSmall, 2020
- Overall Oxygen Electrocatalysis on Nitrogen‐Modified Carbon Catalysts: Identification of Active Sites and In Situ Observation of Reactive IntermediatesAngewandte Chemie International Edition, 2020
- Calibration of computational Mössbauer spectroscopy to unravel active sites in FeNC catalysts for the oxygen reduction reactionInternational Journal of Quantum Chemistry, 2020
- Bifunktionale Sauerstoffelektroden durch Einbettung von Co@Co3O4‐Nanopartikeln in CNT‐gekoppelte Stickstoff‐dotierte KohlenstoffpolyederAngewandte Chemie, 2016
- A Precious‐Metal‐Free Regenerative Fuel Cell for Storing Renewable ElectricityAdvanced Energy Materials, 2013
- Physisorption of nitrogen by porous materialsJournal of Porous Materials, 1995