Fátima Santos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fátima Santos has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Adélio Mendes
University of Porto Rua Dr. Roberto Frias
11 shared publications - Dzmitry Ivanou
LEPABE─Laboratory for Process Engineering, Environment, Biotechnology and Energy, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
8 shared publications - Carolina Hora
LEPABE - Laboratory for Process Engineering, Environment, Biotechnology and Energy, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465, Porto, Portugal; ALiCE - Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, Porto, 4200-465, Portugal
3 shared publications - Maria Goreti Ferreira Sales
BioMark, CEMMPRE, ARISE, Department of Chemical Engineering, Faculty of Sciences and Technology, University of Coimbra, Coimbra, Portugal
2 shared publications Sofia Delgado
University of Porto Rua Dr. Roberto Frias
2 shared publicationsAdélio Mendes
1 shared publication
Latest Publications
- Open Access
- 29 October 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (44) , 69026-69037
High-Performing and Stable Membrane Electrode Assemblies Based on Fluorine-Doped Tin Oxide Catalysts
To improve the iridium utilization on proton exchange membrane water electrolysers (PEMWEs), a new support based on fluorine-doped tin oxide (FTO) nanoparticles was developed, characterized, and assessed for the anode side. This approach utilizes a sol–gel method combined with a 500 °C annealing treatment to promote favorable metal–support interactions and contribute to catalyst stability. The resulting IrOx/FTO catalyst exhibits remarkable performance at a low Ir loading of 0.5 mgIr cm–2, corresponding to half the loading of the commercial IrO2 reference. The membrane electrode assembly (MEA) incorporating the FTO-based anode outperformed the electrolyzer employing commercial IrO2, reaching 1.35 A cm–2 at 2 V and 60 °C compared with 0.9 A cm–2 for the commercial catalyst. Moreover, these catalysts demonstrated excellent operational stability, with no significant activity decline during more than 300 h of continuous operation at 1.3 A cm–2 and 80 °C. These findings pave the way for innovative and cost-effective membrane electrode assemblies with enhanced stability.
- 29 October 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (44) , 69026-69037
Open AccessHigh-Performing and Stable Membrane Electrode Assemblies Based on Fluorine-Doped Tin Oxide Catalysts
To improve the iridium utilization on proton exchange membrane water electrolysers (PEMWEs), a new support based on fluorine-doped tin oxide (FTO) nanoparticles was developed, characterized, and assessed for the anode side. This approach utilizes a sol–gel method combined with a 500 °C annealing treatment to promote favorable metal–support interactions and contribute to catalyst stability. The resulting IrOx/FTO catalyst exhibits remarkable performance at a low Ir loading of 0.5 mgIr cm–2, corresponding to half the loading of the commercial IrO2 reference. The membrane electrode assembly (MEA) incorporating the FTO-based anode outperformed the electrolyzer employing commercial IrO2, reaching 1.35 A cm–2 at 2 V and 60 °C compared with 0.9 A cm–2 for the commercial catalyst. Moreover, these catalysts demonstrated excellent operational stability, with no significant activity decline during more than 300 h of continuous operation at 1.3 A cm–2 and 80 °C. These findings pave the way for innovative and cost-effective membrane electrode assemblies with enhanced stability.
- Open Access
- 30 September 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (40) , 61767-61780
High-Performing Unitized Regenerative Fuel Cell Using PGM-Free Bifunctional Catalysts from Waste-Derived Carbon
Unitized regenerative alkaline-exchange membrane fuel cells (UR-AEMFCs) are a promising technology for energy storage, attending to their ability to operate in both galvanic (FC) and electrolytic (WE) modes. However, their round-trip efficiency (RTE) is greatly dependent on the selected electrodes toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). As both mechanisms have slow kinetics, developing innovative and efficient bifunctional catalysts is critical to increasing UR-AEMFC performance. In this work, bifunctional precious group metal-free (PGM-free) catalysts were prepared by nucleating either Fe, Ni, or FeNi on nitrogen-doped carbons; the prepared catalysts have a maximum metal loading of up to 3 wt %. To align with circular economy principles, a sustainable approach was employed by using a phenolic resin-based waste product as a carbon precursor. The carbonization process, conducted in the presence of H3PO4 and melamine, yielded nitrogen-doped carbon supports with enhanced properties. Notably, in single-cell operation, the prepared PGM-free catalysts─NiNC, FeNC, and FeNiNC─generated RTEs of 29%, 38%, and 35%, respectively, under corrosion-free alkaline electrolytes (0.5 M KOH); similar results were reported for benchmark commercial catalysts such as IrO2, which displayed ca. 30% of RTE. Moreover, NiNC catalyst showed a half-wave potential of 0.74 V, an onset potential of 0.88 V, and an overpotential of 420 mV at 10 mA cm–2. In turn, the FeNC displayed a half-wave potential of 0.72 V, an onset potential of 0.90 V, and an overpotential of 510 mV at 10 mA cm–2. Regarding the FeNiNC, this catalyst demonstrates a half-wave potential of 0.76 V, an onset potential of 0.86 V, and an overpotential of 380 mV at 10 mA cm–2. These results are particularly noteworthy considering the significantly lower metal loadings in the produced PGM-free catalysts. Besides, to evaluate their long-term performance, the single cell was submitted to several potential cycles within the potential window range for FC and WE modes, i.e., between 0.6 and 2.0 V. The noble Pt/C catalysts deactivated completely after the stress test, while the novel FeNiNC and NiNC catalysts, containing an ultralow loading of critical raw materials (CRMs), demonstrated an outstanding compromise between activity and stability, proving their potential to be integrated in UR-AEMFC.
- 30 September 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (40) , 61767-61780
Open AccessHigh-Performing Unitized Regenerative Fuel Cell Using PGM-Free Bifunctional Catalysts from Waste-Derived Carbon
Unitized regenerative alkaline-exchange membrane fuel cells (UR-AEMFCs) are a promising technology for energy storage, attending to their ability to operate in both galvanic (FC) and electrolytic (WE) modes. However, their round-trip efficiency (RTE) is greatly dependent on the selected electrodes toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). As both mechanisms have slow kinetics, developing innovative and efficient bifunctional catalysts is critical to increasing UR-AEMFC performance. In this work, bifunctional precious group metal-free (PGM-free) catalysts were prepared by nucleating either Fe, Ni, or FeNi on nitrogen-doped carbons; the prepared catalysts have a maximum metal loading of up to 3 wt %. To align with circular economy principles, a sustainable approach was employed by using a phenolic resin-based waste product as a carbon precursor. The carbonization process, conducted in the presence of H3PO4 and melamine, yielded nitrogen-doped carbon supports with enhanced properties. Notably, in single-cell operation, the prepared PGM-free catalysts─NiNC, FeNC, and FeNiNC─generated RTEs of 29%, 38%, and 35%, respectively, under corrosion-free alkaline electrolytes (0.5 M KOH); similar results were reported for benchmark commercial catalysts such as IrO2, which displayed ca. 30% of RTE. Moreover, NiNC catalyst showed a half-wave potential of 0.74 V, an onset potential of 0.88 V, and an overpotential of 420 mV at 10 mA cm–2. In turn, the FeNC displayed a half-wave potential of 0.72 V, an onset potential of 0.90 V, and an overpotential of 510 mV at 10 mA cm–2. Regarding the FeNiNC, this catalyst demonstrates a half-wave potential of 0.76 V, an onset potential of 0.86 V, and an overpotential of 380 mV at 10 mA cm–2. These results are particularly noteworthy considering the significantly lower metal loadings in the produced PGM-free catalysts. Besides, to evaluate their long-term performance, the single cell was submitted to several potential cycles within the potential window range for FC and WE modes, i.e., between 0.6 and 2.0 V. The noble Pt/C catalysts deactivated completely after the stress test, while the novel FeNiNC and NiNC catalysts, containing an ultralow loading of critical raw materials (CRMs), demonstrated an outstanding compromise between activity and stability, proving their potential to be integrated in UR-AEMFC.
- Open Access
- 30 June 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
Solvent-Dependent Charge Transfer Dynamics under Indoor Light in Efficient and Stable Copper-Mediated DSSCs
- 30 June 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
Open AccessSolvent-Dependent Charge Transfer Dynamics under Indoor Light in Efficient and Stable Copper-Mediated DSSCs
- 29 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (15) , 11021-11032
Boosting the Performance of Monolithic Dye-Sensitized Solar Cells under Simulated Solar and Artificial Light
- 29 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (15) , 11021-11032
Boosting the Performance of Monolithic Dye-Sensitized Solar Cells under Simulated Solar and Artificial Light
Solid‐State Monolithic Dye‐Sensitized Solar Cell Exceeding 10% Efficiency Using a Copper‐Complex Hole Transport Material and a Carbon Counter‐Electrode
The continuous growth of the Internet of Things devices operating indoor triggers the development of indoor photovoltaic (iPV) technologies to power them. Dye‐sensitized solar cells (DSSCs) with Cu‐based complexes as hole transport material (HTM) and organic sensitizers are among the most efficient, safe, and sustainable options for iPVs. The typical copper‐mediated DSSCs are assembled in the conventional configuration using PEDOT:PSS counter‐electrodes. Herein, a highly efficient solid‐state monolithic DSSCs with a copper‐complex HTM and a carbon counter‐electrode are developed. The monolithic structure allows a low‐cost and direct design for producing in‐series modules, which is very attractive for the market‐scale production of iPVs. Typical devices display average power conversion efficiencies (PCEs) of ≈9.5%–10% under 1‐sun simulated solar light provided by a Class ABA light‐emitting diode Solar Simulator. The best energy performing device renders a stable PCE of 10.4% under 1‐sun and PCEs of 26.1% and 28.5% under 600 lx and 1000 lx indoor light, respectively. The performance of a typical device is independently confirmed at Fraunhofer Institute for Solar Energy Research, with a certified PCE of 8.7% using a Class AAA Xenon Solar Simulator (AM1.5 G, 25 °C).
Solid‐State Monolithic Dye‐Sensitized Solar Cell Exceeding 10% Efficiency Using a Copper‐Complex Hole Transport Material and a Carbon Counter‐Electrode
The continuous growth of the Internet of Things devices operating indoor triggers the development of indoor photovoltaic (iPV) technologies to power them. Dye‐sensitized solar cells (DSSCs) with Cu‐based complexes as hole transport material (HTM) and organic sensitizers are among the most efficient, safe, and sustainable options for iPVs. The typical copper‐mediated DSSCs are assembled in the conventional configuration using PEDOT:PSS counter‐electrodes. Herein, a highly efficient solid‐state monolithic DSSCs with a copper‐complex HTM and a carbon counter‐electrode are developed. The monolithic structure allows a low‐cost and direct design for producing in‐series modules, which is very attractive for the market‐scale production of iPVs. Typical devices display average power conversion efficiencies (PCEs) of ≈9.5%–10% under 1‐sun simulated solar light provided by a Class ABA light‐emitting diode Solar Simulator. The best energy performing device renders a stable PCE of 10.4% under 1‐sun and PCEs of 26.1% and 28.5% under 600 lx and 1000 lx indoor light, respectively. The performance of a typical device is independently confirmed at Fraunhofer Institute for Solar Energy Research, with a certified PCE of 8.7% using a Class AAA Xenon Solar Simulator (AM1.5 G, 25 °C).
- 16 November 2022
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 5 (12) , 14846-14857
Conventional and Back-Illuminated Cobalt- and Iodine-Mediated Dye-Sensitized Solar Cells for Artificial and Solar Light Conversion
- 16 November 2022
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 5 (12) , 14846-14857
Conventional and Back-Illuminated Cobalt- and Iodine-Mediated Dye-Sensitized Solar Cells for Artificial and Solar Light Conversion
- Open Access
- 26 May 2022
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 5 (6) , 7220-7229
Stable Cobalt-Mediated Monolithic Dye-Sensitized Solar Cells by Full Glass Encapsulation
Dye-sensitized solar cells (DSSCs) emerged in the market as one of the most promising indoor photovoltaic technologies to address the need for wireless powering of low-consuming electronics and sensor nodes of the internet of things (IoT). The monolithic design structure of the cell (M-DSSCs) makes the devices simpler and cheaper, and it is straightforward for constructing in-series modules. The most efficient DSSCs reported so far are Co(III/II)-mediated liquid junction cells with acetonitrile electrolytes; however, they are mostly unstable. This study reports on highly stable cobalt-mediated M-DSSCs, passing thermal cycling tests up to 85 °C according to ISOS standard protocols. Under 1000 h of aging in the dark and under simulated solar and artificial light soaking, all tested cells improved or retained their initial power conversion efficiency. Advanced long-term stability was achieved by eliminating the extrinsic factors of degradation, such as the interaction of the cell components with the environment and electrolyte leakage. This was obtained by encapsulation of the devices using a glass-frit sealant, including the holes for filling up the liquid components of the cells. The hermeticity of the encapsulation complies with the MIL-STD-883 standard fine helium gas leakage test, and its hermeticity remained unchanged after humidity-freeze cycles according to IEC 61646. The elimination of extrinsic degradation factors allowed reliable assessment of inner factors accountable for aging. The impact of the ISOS-protocol test conditions on the intrinsic device stability and long-term photovoltaic history of the M-DSSCs is discussed.
- 26 May 2022
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 5 (6) , 7220-7229
Open AccessStable Cobalt-Mediated Monolithic Dye-Sensitized Solar Cells by Full Glass Encapsulation
Dye-sensitized solar cells (DSSCs) emerged in the market as one of the most promising indoor photovoltaic technologies to address the need for wireless powering of low-consuming electronics and sensor nodes of the internet of things (IoT). The monolithic design structure of the cell (M-DSSCs) makes the devices simpler and cheaper, and it is straightforward for constructing in-series modules. The most efficient DSSCs reported so far are Co(III/II)-mediated liquid junction cells with acetonitrile electrolytes; however, they are mostly unstable. This study reports on highly stable cobalt-mediated M-DSSCs, passing thermal cycling tests up to 85 °C according to ISOS standard protocols. Under 1000 h of aging in the dark and under simulated solar and artificial light soaking, all tested cells improved or retained their initial power conversion efficiency. Advanced long-term stability was achieved by eliminating the extrinsic factors of degradation, such as the interaction of the cell components with the environment and electrolyte leakage. This was obtained by encapsulation of the devices using a glass-frit sealant, including the holes for filling up the liquid components of the cells. The hermeticity of the encapsulation complies with the MIL-STD-883 standard fine helium gas leakage test, and its hermeticity remained unchanged after humidity-freeze cycles according to IEC 61646. The elimination of extrinsic degradation factors allowed reliable assessment of inner factors accountable for aging. The impact of the ISOS-protocol test conditions on the intrinsic device stability and long-term photovoltaic history of the M-DSSCs is discussed.