Determination of CM choke parameters for SiC MOSFET motor drive based on simple measurements and frequency domain modeling
Authors:
- 1 March 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 3, 2861-2867
Abstract
The adoption of silicon carbide (SiC) MOSFETs in variable speed motor drives makes it possible to increase the inverter switching frequency up to several hundred kilohertz without incurring excessive inverter loss. As a result, the harmonic currents and related losses in the machine can be significantly reduced, and the dynamic performance of motor will also be improved. However, the increased switching frequency of SiC drives will increase the ground leakage current in the common mode (CM) path, presenting new challenges on CM choke design. This paper aims at understanding the CM choke design under this new circumstance. First, a simple and accurate frequency domain CM circuit modeling approach suitable for SiC motor drives is proposed and subsequently verified through experimental tests. Based on the model, required choke parameters are then determined through analytical calculation. Through comparative analysis, the impact of increased switching frequency on CM choke design is studied.Keywords
This publication has 20 references indexed in Scilit:
- Analysis of a SiC three-phase voltage source inverter under various current and power factor operations2013
- EMI filter design and optimization for both AC and DC side in a DC-fed motor drive system2013
- PWM Impact on CM Noise and AC CM Choke for Variable-Speed Motor DrivesIEEE Transactions on Industry Applications, 2013
- Simplified Design of Common-Mode Chokes for Reduction of Motor Ground Currents in Inverter DrivesIEEE Transactions on Industry Applications, 2011
- Effective EMI Filter Design Method for Three-Phase Inverter Based Upon Software Noise SeparationIEEE Transactions on Power Electronics, 2010
- Analysis of CM Volt-Second Influence on CM Inductor Saturation and Design for Input EMI Filters in Three-Phase DC-Fed Motor Drive SystemsIEEE Transactions on Power Electronics, 2010
- Attenuation of Conducted EMI Emissions From an Inverter-Driven MotorIEEE Transactions on Power Electronics, 2008
- Reduction of common-mode currents in PWM inverter motor drivesIEEE Transactions on Industry Applications, 1999
- An improved inverter output filter configuration reduces common and differential modes dv/dt at the motor terminals in PWM drive systemsIEEE Transactions on Power Electronics, 1998
- Conducted electromagnetic emissions in induction motor drive systems. II. Frequency domain modelsIEEE Transactions on Power Electronics, 1998