Limits of the Process of Rotational Compression of Hollow Stepped Shafts
Open Access
- 19 September 2019
- Vol. 12 (18) , 3049
Abstract
This article presents the results of theoretical–experimental testing of the process of rotational compression of hollow stepped shafts. The advantages of the technology and the potential area of its application were discussed. Further on, the limits of the rotational compression technology, preventing the manufacturing of high-quality products, were presented. The research was conducted on the basis of numerical modelling using the finite element method in Simufact Forming, as well as the results of experimental tests performed in a forging machine for rotational compression. On the basis of the results obtained, it can be stated that the process of rotational compression of hollow stepped shafts can be hindered by the following phenomena: uncontrolled slip, deformation of the semi-finished product wall, twisting of the formed steps, material cracking, and deformation of the cross-section of the formed steps. The possibility of those hindrances occurring depends heavily on the assumed technological parameters of the process. For this reason, knowledge of the cause of occurrence of those limitations is vital for the development of the technology and the choice of the process parameters.Keywords
Funding Information
- Polish Ministry of Science and Higher Education (Lublin University of Technology-Regional Excellence Initiative (contract no. 030/RID/2018/19))
This publication has 7 references indexed in Scilit:
- Producing hollow drive shafts by rotary compressionArchives of Civil and Mechanical Engineering, 2015
- Study on the Forming Mechanism for Second Step on Hollow Rotor Shaft by 4-Roll Cross Wedge RollingApplied Mechanics and Materials, 2013
- Feasibility Study on Forming Hollow Axle with Multi-Wedge Synchrostep by Cross Wedge RollingApplied Mechanics and Materials, 2012
- Experimental study on flow forming process of AISI 321 steel tube using the Taguchi methodProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2011
- Analysis and design of a new manufacturing process for a support shaft using the finite element methodJournal of Materials Processing Technology, 2002
- New warm forming processes to produce hollow shaftsJournal of Materials Processing Technology, 2001
- Manufacturing of hollow transmission shafts via bulk-metal forgingJournal of Materials Processing Technology, 1997