Surface Development of Polyethylene Terephthalate Films Using Low-Pressure, High-Frequency Argon + Oxygen Plasma on Zinc Powder for Dye-Sensitized Solar Cells
Authors:
- Wittawat PoonthongWPWittawat Poonthong
- Narong MungkungNMNarong Mungkung
- Khanchai TunlasakunKTKhanchai Tunlasakun
- Nuttee ThungsukNTNuttee Thungsuk
- Nat KasayapanandNKNat Kasayapanand
- Somchai ArunrungrusmiSASomchai Arunrungrusmi
- Tanes TanitteerapanTTTanes Tanitteerapan
- Threerapong ManeepenTMThreerapong Maneepen
- Apidat SongrukASApidat Songruk
- Toshifumi YujiTYToshifumi Yuji
Open Access
Abstract
This research has developed a process for producing ZnO thin film from DEZn deposited onto a PET substrate with low-pressure, high-frequency Ar + O2 plasma using a chemical vapor deposition technique. The aim is to study the film production conditions that affect electrical properties, optical properties, and thin film surfaces. This work highlights the use of plasma energy produced from a mixture of gases between Ar + O2. Plasma production is stimulated by an RF power supply to deliver high chemical energy and push ZnO atoms from the cathode inside the reactor onto the substrate through surface chemical reactions. The results showed that increasing the RF power in plasma production affected the chemical reactions on the substrate surface of film formations. Film preparation at an RF power of 300 W will result in the thickest films. The film has a continuous columnar formation, and the surface has a granular structure. This results in the lowest electrical resistivity of 1.8 × 10−4 Ω. In addition, when fabricated into a DSSC device, the device tested the PCE value and showed the highest value at 5.68%. The reason is due to the very rough surface nature of the ZnO film, which increases the scattering and storage of sunlight, making cells more efficient. Therefore, the benefit of this research is that it will be a highly efficient prototype of thin film production technology using a chemical process that reduces production costs and can be used in the industrial development of solar cells.Keywords
All Related Versions
Funding Information
- Royal Golden Jubilee (RGJ) Ph.D. scholarship from the National Research Council of Thailand under the Ministry of Higher Education, Science, Research, and Innovation, (N41A650091)
- project of the Research, Innovation, Partnerships Office (RIPO) with Financial Support from Faculty of Industrial Education and Technology (N41A650091)
This publication has 48 references indexed in Scilit:
- Current advancement of flexible dye sensitized solar cell: A reviewOptik, 2022
- Advance in Using Plasma Technology for Modification or Fabrication of Carbon‐Based Materials and Their Applications in Environmental, Material, and Energy FieldsAdvanced Functional Materials, 2020
- Zinc oxide-based dye-sensitized solar cells using natural and synthetic sensitizersCurrent Research in Green and Sustainable Chemistry, 2020
- Low-temperature deposited ZnO thin films on the flexible substrate by cathodic vacuum arc technologyApplied Surface Science, 2011
- Device Physics of Dye Solar CellsAdvanced Materials, 2010
- Fabrication of high performance Pt counter electrodes on conductive plastic substrate for flexible dye-sensitized solar cellsElectrochimica Acta, 2010
- The structural and optical properties of ZnO/Si thin films by RTA treatmentsApplied Surface Science, 2007
- Rate constants for the gaseous interaction of O(21D2) and O(21S0 - a critical evaluationJournal of Photochemistry, 1978
- Chemical vapour deposition promoted by r.f. dischargeSolid-State Electronics, 1965
- Interstitial zinc in zinc oxideJournal of Physics and Chemistry of Solids, 1957