Impact of the Code-Based Near-Fault Factor on Buried Steel Pipelines via the Design Response Spectrum: Seydişehir–Ermenek Case Study
Author:
- 30 June 2026
- journal article
- Published by Journal of Innovations in Civil Engineering and Technology in Journal of Innovations in Civil Engineering and Technology
- Vol. 8 (1) , 1-13
Abstract
This study investigates the influence of the code-based near-fault factor on the seismic response of buried steel natural-gas pipelines through the design response spectrum approach prescribed in the Turkish Seismic Code for Pipeline Systems and Liquid Storage Tanks (2023). The novelty lies in explicitly incorporating both the maximum-direction and near-fault factors into a spectrum-based finite element assessment and quantitatively evaluating their effects on displacement- and stress-based seismic demands. A planned pipeline route between Seydişehir (Konya) and Ermenek (Karaman), Türkiye, was selected as a case study, and seismic hazard parameters were obtained from the Turkish Seismic Hazard Map. The pipeline was modeled using four-node shell elements, while soil–pipe interaction was represented by linear elastic Winkler springs. Response-spectrum analyses were performed for DD-1, DD-1a, DD-2, and DD-3 ground-motion levels. For the DD-1 level including the near-fault factor, the maximum vertical displacement reached 10.42 mm, and the maximum axial membrane stress was approximately 62 MPa. The inclusion of the near-fault factor increased the maximum vertical displacement by 41% and raised the axial strain and membrane force demands by about 30%. The results demonstrate that neglecting this factor may lead to unconservative estimates of deformation demands in buried steel pipelines near active faults.Keywords
Funding Information
- This research did not receive any specific grant or financial support from public, commercial, or not-for-profit funding agencies.
This publication has 10 references indexed in Scilit:
- Liquefaction potential evaluations by energy-based method and stress-based method for various ground motionsSoil Dynamics and Earthquake Engineering, 2015
- Crystal Plasticity Analysis of Stress Partitioning Mechanisms and Their Microstructural Dependence in Advanced SteelsJournal of Applied Mechanics, 2015
- Finite element analysis of buried steel pipelines under strike-slip fault displacementsSoil Dynamics and Earthquake Engineering, 2010
- Efficient Evaluation of Reliability for Slopes with Circular Slip Surfaces Using Importance SamplingJournal of Geotechnical and Geoenvironmental Engineering, 2009
- Simplified Procedure for Estimating Earthquake-Induced Deviatoric Slope DisplacementsJournal of Geotechnical and Geoenvironmental Engineering, 2007
- A new proposal for simplified design of buried steel pipes crossing active faultsEarthquake Engineering & Structural Dynamics, 2001
- 4. Use of Loss Estimates by Government Agencies in the Northridge Earthquake for Response and RecoveryEarthquake Spectra, 1996
- 9. Response to G. C. Foliente's Discussion of “Narrow Plywood Shear Panels”Earthquake Spectra, 1995
- A refined seismic analysis and design of buried pipeline for fault movementEarthquake Engineering & Structural Dynamics, 1985
- Fault Movement Effects on Buried Oil PipelineTransportation Engineering Journal of ASCE, 1977