Photolithography and Selective Etching of an Array of Quartz Tuning Fork Resonators with Improved Impact Resistance Characteristics
Author:
- Sungkyu LeeSLSungkyu Lee
- 1 August 2001
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 40 (8R)
Abstract
Quartz tuning fork blanks with improved impact-resistant characteristics for use in Qualcomm mobile station modem (MSM)-3000 central processing unit (CPU) chips for code division multiple access (CDMA), personal communication system (PCS), and global system for mobile communication (GSM) systems were designed using finite element method (FEM) analysis and suitable processing conditions were determined for the reproducible precision etching of a Z-cut quartz wafer into an array of tuning forks. Negative photoresist photolithography for the additive process was used in preference to positive photoresist photolithography for the subtractive process to etch the array of quartz tuning forks. The tuning fork pattern was transferred via a conventional photolithographical chromium/quartz glass template using a standard single-sided aligner and subsequent negative photoresist development. A tightly adhering and pinhole-free 600/2000 Å chromium/gold mask was coated over the developed photoresist pattern which was subsequently stripped in acetone. This procedure was repeated on the back surface of the wafer. With the protective metallization area of the tuning fork geometry thus formed, etching through the quartz wafer was performed at 80°C in a ±1.5°C controlled bath containing a concentrated solution of ammonium bifluoride to remove the unwanted areas of the quartz wafer. The quality of the quartz wafer surface finish after quartz etching depended primarily on the surface finish of the quartz wafer prior to etching and the quality of quartz crystals used. Selective etching of a 100 µm quartz wafer could be achieved within 90 min at 80°C. A selective etching procedure with reproducible precision has thus been established and enables the photolithographic mass production of miniature tuning fork resonators.Keywords
This publication has 5 references indexed in Scilit:
- Residual stress in sputtered gold films on quartz measured by the cantilever beam deflection techniqueIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1999
- Anisotropy-independent through micromachining of quartz resonators by ion track etchingIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1997
- Anisotropic etching of Z-cut quartzJournal of Micromechanics and Microengineering, 1993
- Micromachining of quartz and its application to an acceleration sensorSensors and Actuators A: Physical, 1990
- Origin of Piezoelectricity in an α-QuartzJapanese Journal of Applied Physics, 1974