Influence of calcined diatomite content and elevated temperatures on the properties of high strength mortars produced with basalt sand
- 8 June 2020
- journal article
- research article
- Published by Wiley in Structural Concrete
- Vol. 22 (S1)
Abstract
In this paper, the effect of calcined diatomite (CDT) content on the mechanical, microstructural, and mineralogical properties of high strength mortars (HSMs) exposed to 25, 400, 600, 800, and 1,000°C temperatures is investigated. The percentages of CDT that replace Portland cement (PC) in this work are 0, 5, 10, 15, and 20%, by weight. The researched properties of the HSMs are the unit weight (Uw), ultrasonic pulse velocity (Upv), flexural strength (fs), compressive strength (fc) and the analyses of X‐ray powder diffraction, polarized light microscopy, and scanning electron microscopy/energy dispersive spectroscopy. The experimental results show that the CDT has a potential to be successfully employed as a partial replacement of PC in the HSMs exposed to elevated temperatures. The optimal replacement level of PC by CDT is determined as 15% from strength tests. Besides, the Uw, Upv, fs, and fc values progressively reduce as the temperatures subjected to the HSMs increase. The CDT has a positive effect on the fs and fc values the HSMs after exposure to elevated temperatures.Keywords
This publication has 56 references indexed in Scilit:
- More eco-efficient concrete: An approach on optimization in the production and use of waste-based supplementary cementing materialsConstruction and Building Materials, 2019
- Reducing greenhouse gasses emissions by fostering the deployment of alternative raw materials and energy sources in the cleaner cement manufacturing processJournal of Cleaner Production, 2016
- Environmental impacts, life cycle assessment and potential improvement measures for cement production: a literature reviewJournal of Cleaner Production, 2016
- Analysis of material flow and consumption in cement production processJournal of Cleaner Production, 2016
- Cement industry greenhouse gas emissions – management options and abatement costJournal of Cleaner Production, 2016
- An investigation of high-volume fly ash concrete blended with slag subjected to elevated temperaturesJournal of Cleaner Production, 2015
- An investigation on very high volume slag pastes subjected to elevated temperaturesConstruction and Building Materials, 2015
- Sustainable concrete with high volume GGBFS to build Masdar City in the UAECase Studies in Construction Materials, 2014
- Global strategies and potentials to curb CO2 emissions in cement industryJournal of Cleaner Production, 2013
- Emerging energy-efficiency and CO2 emission-reduction technologies for cement and concrete production: A technical reviewRenewable and Sustainable Energy Reviews, 2012