Fabrication and Testing of Prototype Saddle-Shaped Field and Distributed Armature Coils for a 2-MW REBCO Synchronous Generator
- 23 February 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-5
Abstract
Achieving carbon-neutral growth in the aviation sector demands innovative propulsion technologies, with electric propulsion systems offering a particularly promising solution. To advance this goal, we are developing a 2-MW fully superconducting synchronous generator that employs REBa2Cu3O7-δ (REBCO) tapes. The generator is designed as a two-pole machine operating at 3,600 rpm. Its field coil adopts a saddle-shaped winding mounted on a through-shaft, which enables stable high-speed rotation, while the armature employs a distributed winding in which the U, V, and W phases overlap adjacent phases by 60°, thereby enhancing output performance. Each armature winding uses a parallel conductor composed of 20 stacked Face-to-Face Double Stacked (FFDS) rare-earth barium copper oxide (REBCO) tapes, enabling efficient conduction of large AC currents. Because degradation of the critical current (Ic) in the REBCO tape would compromise generator performance, prototype field and armature coils were fabricated and tested to confirm winding feasibility. The field coil, wound with 3.2 km of FFDS REBCO tape, showed no voltage generation up to 75 A, and the high n-values verified the absence of degradation. For the armature, one prototype coil was fabricated using a transposed 20-tape conductor, each tape 40 m in length. V–I measurements of all 20 tapes demonstrated no Ic degradation. These findings confirm the feasibility of employing FFDS REBCO tapes in large-scale, three-dimensional windings without Ic degradation, thereby providing a strong foundation for the development of the 2-MW fully superconducting synchronous generator.Keywords
Funding Information
- New Energy and Industrial Technology Development Organization
This publication has 8 references indexed in Scilit:
- Design of 2-MW REBCO Fully Superconducting Synchronous Generator With Saddle-Shaped Field Coils and Distributed Armature WindingsIEEE Transactions on Applied Superconductivity, 2025
- Review of Cryogenic Power Electronics for All-Electric AircraftIEEE Access, 2025
- Advancements in Superconducting Electric Propulsion: Comparative Analysis and Progress Update of CHEETA and CRUISE MotorsIEEE Transactions on Applied Superconductivity, 2025
- Evaluation of Joining Resistivity of Solder-Processed Face-to-Face Double-Stacked REBCO-Coated Conductors Under the Influence of Current Blocking Obstacles in the Tape StrandsIEEE Transactions on Applied Superconductivity, 2024
- Performance Testing of 400 kW-Rated REBCO Superconducting Synchronous Machine in Low-Temperature and Low-Pressure EnvironmentsIEEE Transactions on Applied Superconductivity, 2024
- A fully superconducting air-core machine for aircraft propulsionIOP Conference Series: Materials Science and Engineering, 2020
- Evaluation of delamination characteristics in GdBCO CC tapes under transverse load using anvil test methods for various anvil contact configurations at 77 KSuperconductor Science and Technology, 2019
- Degradation-Free Impregnated YBCO Pancake Coils by Decreasing Radial Stress in the Windings and Method for Evaluating Delamination Strength of YBCO-Coated ConductorsIEEE Transactions on Applied Superconductivity, 2013