Experimental and Theoretical Study of the Thermal Shock Behavior of Insulating Refractory Materials
Open Access
Abstract
This study investigates the thermal shock behavior of three Al2O3-SiO2 commercial insulating refractory materials (JM23, JM26, and JM28) used in high-temperature industries (>1000 °C). Thermal shock resistance was evaluated through experimental tests and compared with theoretical parameters (R, R⁗, Rst) based on thermoelastic and thermomechanical models. The tests revealed that JM23 did not withstand thermal shock due to its fragility when in contact with water at room temperature, resulting in its immediate collapse. In contrast, JM26 and JM28 maintained their mechanical strength after several thermal shock cycles, although JM28 experienced a more significant decrease in compressive strength. The mechanical behavior under compression changed from semi-fragile to apparently plastic after severe heat treatments. Porosity analysis showed that JM26 had a lower pore size distribution, which contributed to its better thermal shock performance. Theoretical parameters were calculated, confirming that JM26 exhibited the highest resistance to thermal shock. These findings suggest that controlled porosity and microstructure are key factors in improving the thermal performance and durability of insulating refractory materials in high-temperature applications.Keywords
Funding Information
- Agencia Nacional de Promoción Científica y Tecnológica (PICT-2021-00392, PICT-2021-00225, X-877, X-904)
- Universidad Nacional de La Plata (PICT-2021-00392, PICT-2021-00225, X-877, X-904)
This publication has 37 references indexed in Scilit:
- Lightweight and thermally insulating aluminum borate nanofibrous porous ceramicsCeramics International, 2021
- Fracture behavior and thermal shock resistance of alumina-spinel castables-Effect of added fused zirconia-aluminaCeramics International, 2020
- Fabrication and properties of mullite thermal insulation materials with in-situ synthesized mullite hollow whiskersCeramics International, 2020
- Mechanical behavior and microstructure of porous needle: Aluminum borate (Al18B4O33) and Al2O3-Al18B4O33 compositesCeramics International, 2017
- Thermo-mechanical characterization of a silica-alumina refractory concrete based on calcined algerian kaolinCeramics International, 2016
- Thermal shock damage evaluation of refractory castables via hot elastic modulus measurementsCeramics International, 2013
- Study on residual behaviour and flexural toughness of fibre cocktail reinforced self compacting high performance concrete after exposure to high temperatureConstruction and Building Materials, 2011
- Thermal shock resistance and fatigue of Zircon–Mullite composite materialsCeramics International, 2011
- Structure and properties of mullite—A reviewJournal of the European Ceramic Society, 2008
- Modelling the silica glass structure by the Rietveld methodJournal of Non-Crystalline Solids, 1995