Effects of Different Admixtures on the Mechanical and Thermal Insulation Properties of Desulfurization Gypsum-Based Composites
Open Access
Abstract
The single-factor experiments are designed to quantitatively investigate the effects of silica fume, mineral powder, and fly ash on the mechanical and thermal insulation properties of desulfurization gypsum-based composites (DGCs). The effect mechanism is discussed from the microscopic morphology of the internal structure, and the corresponding relationship between the strength and thermal conductivity of this material is evaluated by the regression model. The results show that the admixture of silica fume, mineral powder, and fly ash improves the strengths and thermal insulation properties of DGCs, with the order of influence silica fume > mineral powder > fly ash. The optimal 28 d compressive strength and thermal conductivity are 34.17 MPa and 0.2146 W/(m·K), respectively, at a silica fume dosage of 35%. The enhancement effects on the strength and thermal insulation performance of DGCs are attributed to the increase in the hydration products C-S-H gel and Aft. Moreover, the thermal conductivity linearly decreases with the increase in the compressive strength of DGC after adding silica fume, mineral powder, and fly ash. The linear regression models exhibit good precision for evaluating the corresponding relationships between the compressive strength and thermal conductivity of DGCs with different admixtures.Keywords
Funding Information
- National Natural Science Foundation of China (52168027, 51968009, [2020]1Y244, QYNYL [2017]0013)
- Guizhou Province Science and Technology Project (52168027, 51968009, [2020]1Y244, QYNYL [2017]0013)
- Civil Engineering First-Class Discipline Construction Project of Guizhou Province (52168027, 51968009, [2020]1Y244, QYNYL [2017]0013)
This publication has 34 references indexed in Scilit:
- Preparation of Foamed Phosphogypsum Lightweight Materials by Incorporating Cementitious AdditivesMaterials Science, 2019
- Controlling the heat evaluation of cement slurry system used in natural gas hydrate layer by micro-encapsulated phase change materialsSolar Energy, 2018
- Strength characteristics of fly ash stabilized with lime and modified with phosphogypsumJournal of Building Engineering, 2017
- Utilization of semi-dry sintering flue gas desulfurized ash for SO2 generation during sulfuric acid production using boiling furnaceChemical Engineering Journal, 2017
- Research on saline-alkali soil amelioration with FGD gypsumResources, Conservation and Recycling, 2017
- Multi-objective optimization of a honeycomb heat sink using Response Surface MethodInternational Journal of Heat and Mass Transfer, 2016
- The Preparation of Modified Fiber Reinforced Desulfurization Gypsum Insulation BoardApplied Mechanics and Materials, 2014
- Effect of nano-SiO2 and nano-TiO2 addition on the rheological behavior and the hardened properties of cement mortarsMaterials Science and Engineering: A, 2012
- A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologiesJournal of Cleaner Production, 2009
- Utilization of fly ash and ground granulated blast furnace slag as an alternative silica source in reactive powder concreteFuel, 2008