Near-Surface Reconfiguration of Biopolymer Blends by Mechanical Embossment: Creation of Friction-Reduced Foils
Open Access
Abstract
Biopolymer blends of polylactic acid (PLA) and polybutylene adipate-co-terephthalate (PBAT) are extruded into flexible monolayer films. These blends are excellent candidates for the realization of environmentally friendly packaging applications. A necessary pre-requisite for that are appropriate tribological properties under mechanical contact. Reasonable wear resistance allows good protection of packed goods, and low friction forces reduce difficulties in stacking. In this research, mechanical embossment under high loads at room temperature was used for the modification of polymer surfaces to exhibit a significant friction reduction under dry conditions. The results particularly show a systematic decrease in the coefficient of friction for biopolymer blends containing 30 wt% and 40 wt% PBAT. FTIR was used to analyze the change in surface composition after mechanical embossing. A sophisticated FTIR calibration method revealed that the blend with 30 wt% PBAT shows a modified distribution of PBAT and PLA at the surface due to mechanical embossment. This leads to a controlled and long-lasting modification of the surface properties without a substantial change in the chemical composition of the polymer in bulk. Without the use of additional coatings, biodegradable packaging foils with improved characteristics are accessible.Keywords
Funding Information
- German Federal Ministry of Education and Research (BMBF)
This publication has 36 references indexed in Scilit:
- Creating Hydrophobic Foils From Biopolymer Blends Using Mechanical MicroimprintingChemphyschem, 2023
- A review of recent advances in tribologyFriction, 2020
- Optimising Ductility of Poly(Lactic Acid)/Poly(Butylene Adipate-co-Terephthalate) Blends Through Co-continuous Phase MorphologyJournal of Polymers and the Environment, 2018
- Effect of atmospheric pressure plasma pre-treatment and aging conditions on the surface of thermoplasticsWelding in the World, 2014
- Spectral Characterization of Four Kinds of Biodegradable Plastics: Poly (Lactic Acid), Poly (Butylenes Adipate-Co-Terephthalate), Poly (Hydroxybutyrate-Co-Hydroxyvalerate) and Poly (Butylenes Succinate) with FTIR and Raman SpectroscopyJournal of Polymers and the Environment, 2012
- The superhydrophobicity of polymer surfaces: Recent developmentsJournal of Polymer Science Part B: Polymer Physics, 2011
- Applications of Bio‐Inspired Special Wettable SurfacesAdvanced Materials, 2010
- Melt rheology of polylactide/poly(butylene adipate-co-terephthalate) blendsCarbohydrate Polymers, 2008
- New emerging trends in synthetic biodegradable polymers – Polylactide: A critiqueEuropean Polymer Journal, 2007
- Sliding friction behaviour of polymer-polymer material combinationsWear, 1983