Design Method for Modulated Metasurface Antennas Composed of Anisotropic Elements Based on Generalized Boundary Conditions
- 26 July 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 18 (9) , 1848-1852
Abstract
A novel and efficient design method for modulated metasurface antennas composed of anisotropic elements is proposed in this letter, based on generalized boundary conditions. An analytical model of surface impedance is derived with the effective surface susceptibilities of the patch layer, an equivalent circuit model of the element, and the transverse resonance technique. The analysis method of elements is then utilized to design modulated metasurface antennas with desired radiation patterns. A linearly polarized antenna prototype with a circular aperture of 180 mm in diameter is designed and measured to demonstrate the effectiveness of this approach. The prototype shows good radiation characteristics at 9.75 GHz with the measured gain of 21.77 dB and the aperture efficiency of 44.5%.Keywords
Funding Information
- National Basic Research Program of China (2017YFA0700201)
This publication has 14 references indexed in Scilit:
- Analysis of Reflectarray Antenna Elements Under Arbitrary Incident Angles and Polarizations Using Generalized Boundary ConditionsIEEE Antennas and Wireless Propagation Letters, 2018
- Synthesis of Modulated-Metasurface Antennas With Amplitude, Phase, and Polarization ControlIEEE Transactions on Antennas and Propagation, 2016
- General Metasurface Synthesis Based on Susceptibility TensorsIEEE Transactions on Antennas and Propagation, 2015
- Modeling and Analysis of Printed-Circuit Tensor Impedance SurfacesIEEE Transactions on Antennas and Propagation, 2012
- A Circularly-Polarized Isoflux Antenna Based on Anisotropic MetasurfaceIEEE Transactions on Antennas and Propagation, 2012
- An Overview of the Theory and Applications of Metasurfaces: The Two-Dimensional Equivalents of MetamaterialsIEEE Antennas and Propagation Magazine, 2012
- A Printed Leaky-Wave Antenna Based on a Sinusoidally-Modulated Reactance SurfaceIEEE Transactions on Antennas and Propagation, 2011
- Scalar and Tensor Holographic Artificial Impedance SurfacesIEEE Transactions on Antennas and Propagation, 2010
- Simple and Accurate Analytical Model of Planar Grids and High-Impedance Surfaces Comprising Metal Strips or PatchesIEEE Transactions on Antennas and Propagation, 2008
- A pole-zero matching method for EBG surfaces composed of a dipole FSS printed on a grounded dielectric slabIEEE Transactions on Antennas and Propagation, 2005