Xiao Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiao Liu has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Fan Yang
Tsinghua University
4 shared publications - Maokun Li
Tsinghua University
4 shared publications - Shenheng Xu
Tsinghua University
4 shared publications - Xiao Jia
School of Automation and Intelligence, Beijing Jiaotong University, Beijing, China
1 shared publication
Latest Publications
- 9 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 68 (10) , 7121-7130
Fast Nonuniform Metasurface Analysis in FDTD Using Surface Susceptibility Model
Analysis of non-uniform metasurfaces requires enormous computational resources and even cannot be achieved in some cases, due to their multi-scale property. To address this, we propose a fast analysis method in FDTD scheme in this paper. Two steps are required: first, non-uniform metasurfaces are modeled as a distribution of surface susceptibilities. Secondly, the surface susceptibility model (SSM) is inserted into FDTD equations in a form of surface polarization currents based on Generalized Sheet Transition Conditions (GSTCs). A detailed comparison is made between brute force simulation and our proposed method. Compared to the hours consumed for physical model simulation, surface susceptibility model simulation’s time consumption is in seconds while simultaneously maintaining similar field responses independent of the incident wave’s angle and polarization.
- 9 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 68 (10) , 7121-7130
Fast Nonuniform Metasurface Analysis in FDTD Using Surface Susceptibility Model
Analysis of non-uniform metasurfaces requires enormous computational resources and even cannot be achieved in some cases, due to their multi-scale property. To address this, we propose a fast analysis method in FDTD scheme in this paper. Two steps are required: first, non-uniform metasurfaces are modeled as a distribution of surface susceptibilities. Secondly, the surface susceptibility model (SSM) is inserted into FDTD equations in a form of surface polarization currents based on Generalized Sheet Transition Conditions (GSTCs). A detailed comparison is made between brute force simulation and our proposed method. Compared to the hours consumed for physical model simulation, surface susceptibility model simulation’s time consumption is in seconds while simultaneously maintaining similar field responses independent of the incident wave’s angle and polarization.
- 26 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 18 (9) , 1848-1852
Design Method for Modulated Metasurface Antennas Composed of Anisotropic Elements Based on Generalized Boundary Conditions
A novel and efficient design method for modulated metasurface antennas composed of anisotropic elements is proposed in this letter, based on generalized boundary conditions. An analytical model of surface impedance is derived with the effective surface susceptibilities of the patch layer, an equivalent circuit model of the element, and the transverse resonance technique. The analysis method of elements is then utilized to design modulated metasurface antennas with desired radiation patterns. A linearly polarized antenna prototype with a circular aperture of 180 mm in diameter is designed and measured to demonstrate the effectiveness of this approach. The prototype shows good radiation characteristics at 9.75 GHz with the measured gain of 21.77 dB and the aperture efficiency of 44.5%.
- 26 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 18 (9) , 1848-1852
Design Method for Modulated Metasurface Antennas Composed of Anisotropic Elements Based on Generalized Boundary Conditions
A novel and efficient design method for modulated metasurface antennas composed of anisotropic elements is proposed in this letter, based on generalized boundary conditions. An analytical model of surface impedance is derived with the effective surface susceptibilities of the patch layer, an equivalent circuit model of the element, and the transverse resonance technique. The analysis method of elements is then utilized to design modulated metasurface antennas with desired radiation patterns. A linearly polarized antenna prototype with a circular aperture of 180 mm in diameter is designed and measured to demonstrate the effectiveness of this approach. The prototype shows good radiation characteristics at 9.75 GHz with the measured gain of 21.77 dB and the aperture efficiency of 44.5%.
- Open Access
- 8 May 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (9) , 1891
Generalized Boundary Conditions in Surface Electromagnetics: Fundamental Theorems and Surface Characterizations
Generalized boundary conditions (GBCs) for electromagnetic surfaces are investigated in this paper, which can be used to analytically characterize field discontinuities across two-dimensional surfaces. First, five representative features are described to categorize various surface problems which require proper GBC-based characterization procedures. Next, the generalized boundary conditions are discussed in details, in association with impedance boundary conditions, generalized sheet transition conditions, and surface scattering coefficients. Then an extraction method for surface susceptibilities, the characteristic parameters of surfaces in GBCs, are proposed and validated. Finally, to illustrate the applications of GBCs, two representative surface problems are demonstrated, namely, isolated-aperture surface analysis and surface-wave mode characterization. For the isolated-aperture surface, a characterization procedure is derived based on GBCs and Babinet’s principle, and the accuracy is validated through comparison with full-wave simulations. For surface wave analysis, a characterization procedure is also developed from GBCs, and the feasibility is verified by numerical examples as well.
- 8 May 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (9) , 1891
Open AccessGeneralized Boundary Conditions in Surface Electromagnetics: Fundamental Theorems and Surface Characterizations
Generalized boundary conditions (GBCs) for electromagnetic surfaces are investigated in this paper, which can be used to analytically characterize field discontinuities across two-dimensional surfaces. First, five representative features are described to categorize various surface problems which require proper GBC-based characterization procedures. Next, the generalized boundary conditions are discussed in details, in association with impedance boundary conditions, generalized sheet transition conditions, and surface scattering coefficients. Then an extraction method for surface susceptibilities, the characteristic parameters of surfaces in GBCs, are proposed and validated. Finally, to illustrate the applications of GBCs, two representative surface problems are demonstrated, namely, isolated-aperture surface analysis and surface-wave mode characterization. For the isolated-aperture surface, a characterization procedure is derived based on GBCs and Babinet’s principle, and the accuracy is validated through comparison with full-wave simulations. For surface wave analysis, a characterization procedure is also developed from GBCs, and the feasibility is verified by numerical examples as well.
- 19 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 17 (12) , 2208-2212
Analysis of Reflectarray Antenna Elements Under Arbitrary Incident Angles and Polarizations Using Generalized Boundary Conditions
A novel analysis method for reflectarray antenna elements is proposed in this paper, which is derived from generalized boundary conditions (GBCs). Firstly, the effective surface susceptibilities of the patch layer are extracted from two sets of simulations of given incident angles and polarizations. Then the effective surface impedances of reflectarray antenna elements are analytically computed for arbitrary incident angles and polarizations, from which the reflection coefficients can be readily obtained. The detailed analysis procedure is presented, and its effectiveness is validated through several representative examples of reflectarray antenna elements.
- 19 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 17 (12) , 2208-2212
Analysis of Reflectarray Antenna Elements Under Arbitrary Incident Angles and Polarizations Using Generalized Boundary Conditions
A novel analysis method for reflectarray antenna elements is proposed in this paper, which is derived from generalized boundary conditions (GBCs). Firstly, the effective surface susceptibilities of the patch layer are extracted from two sets of simulations of given incident angles and polarizations. Then the effective surface impedances of reflectarray antenna elements are analytically computed for arbitrary incident angles and polarizations, from which the reflection coefficients can be readily obtained. The detailed analysis procedure is presented, and its effectiveness is validated through several representative examples of reflectarray antenna elements.