BaAl1.4Si0.6O3.4N0.6:Eu2+ green phosphors’ application for improving luminous performance
Open Access
- 1 October 2023
- journal article
- research article
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 13 (5) , 4958-4965
Abstract
The molten salt synthesis (MSS) method was used to effectively prepare green phosphors BaAl1.4Si0.6O3.4N0.6:Eu2+ (or BSON:Eu2+) via one homogeneous sphere-like morphology utilizing NaNO3 in the form of the reacting agent. The phosphors produced one wide stimulation spectrum between 250 and 460 nm, as well as a significant green emission has a maximum point at 510 nm owing to the 4f65d1-4f7 (8S7/2) shifts for Eu2+ ions. With illumination under 365 as well as 450 nm, the ideal discharge strengths for the specimen prepared utilizing melted salt would receive a boost of 17% and 13%, surpassing the specimen prepared utilizing the traditional solid-state reaction (SSR) approach. The abatement of concentration for the ions of Eu2+ from BSON:Eu2+ is 5 mol%. In addition, the interactivity of dipole-dipole would be the cause of said abatement. Heat abatement would be studied utilizing the formation coordinate method with abatement temperature reaching ∼200 oC. Elemental mapping as well as power-dispersing X-ray spectroscopy (EDS) spectra demonstrated that the expected BaAl1.4Si0.6O3.4N0.6:Eu2+ materials were formed.Keywords
This publication has 27 references indexed in Scilit:
- Photon quantification in Ho3+/Yb3+ co-doped opto-thermal sensitive fluotellurite glass phosphorApplied Optics, 2020
- Prediction of lifetime by lumen degradation and color shift for LED lamps, in a non-accelerated reliability test over 20,000 hApplied Optics, 2019
- Effective freeform TIR lens designed for LEDs with high angular color uniformityApplied Optics, 2018
- Solar spectrum matching with white OLED and monochromatic LEDsApplied Optics, 2018
- Design of a 2.2-mW 24-Mb/s CMOS VLC Receiver SoC With Ambient Light Rejection and Post-Equalization for Li-Fi ApplicationsJournal of Lightwave Technology, 2018
- Wide color gamut display with white and emerald backlightingApplied Optics, 2018
- Spectral optimization of phosphor-coated white LED for road lighting based on the mesopic limited luminous efficacy and IES color fidelity indexApplied Optics, 2018
- Lumen degradation analysis of LED lamps based on the subsystem isolation methodApplied Optics, 2018
- Unambiguous Peak Recognition for a Silicon Fabry–Pérot Interferometric Temperature SensorJournal of Lightwave Technology, 2018
- Experimental Demonstration of High-Speed 4 × 4 Imaging Multi-CAP MIMO Visible Light CommunicationsJournal of Lightwave Technology, 2018