Spontaneous gelcasting of translucent alumina ceramics
Open Access
- 2 July 2013
- journal article
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 3 (8) , 1000-1006
Abstract
Translucent alumina ceramics was fabricated by a novel and simple gelling system using a water-soluble co-polymer of isobutylene and maleic anhydride (Isobam), acting as dispersant and gelling agent. Alumina slurry was prepared by mixing alumina powder, deionized water and 0.5wt% Isobam. Both rheological properties and gelling behaviors of the slurry were evaluated. Without an initiator or any other additives, gelation of the slurry occurred at room temperature in air atmosphere. After dried and presintered, the green body was sintered at 1850°C for 5h in vacuum furnace. In-line transmittance of the resultant alumina ceramics (1mm thick) was 29.5% at 600nm.Keywords
This publication has 6 references indexed in Scilit:
- Gelcasting and Pressureless Sintering of Translucent Alumina CeramicsJournal of the American Ceramic Society, 2008
- Gelcasting of Alumina Using Epoxy Resin as a Gelling AgentJournal of the American Ceramic Society, 2007
- Gelcasting of Zirconia Using AgaroseJournal of the American Ceramic Society, 2006
- Alumina bodies with near-to-theoretical density by aqueous gelcasting using concentrated agarose solutionsCeramics International, 2005
- Chemorheology of Aqueous‐Based Alumina‐Poly(vinyl alcohol) Gelcasting SuspensionsJournal of the American Ceramic Society, 1999
- Development of self-hardening slip castingJournal of the European Ceramic Society, 1997