Effects of Retained Austenite upon Softening during Low-temperature Tempering in Martensitic Carbon Steels
Open Access
- 30 January 2024
- journal article
- research article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 64 (2) , 449-458
Abstract
The effects of retained austenite upon softening during low-temperature tempering at 373 K were investigated using martensitic carbon steels with and without retained austenite. To increase the amount of retained austenite, 10 mass% Ni was added to the base carbon steel (Fe-0.3C alloy). During tempering, the hardness decreased more rapidly in the Ni-added steel containing 6 vol.% retained austenite than in the base steel without retained austenite. Analyses of the microstructure and the carbon content in the solid solution (i.e., the solute carbon concentration) revealed that the retained austenite tended to suppress carbide precipitation and significantly reduced the solute carbon concentration in the martensitic matrix. We demonstrated that retained austenite acts as an effective absorption site for solute carbon in the martensitic matrix; however, the partitioned carbon is unevenly localized near the martensite/austenite interface, owing to the poor diffusivity at 373 K.Keywords
This publication has 17 references indexed in Scilit:
- Quantitative evaluation of dislocation density in as-quenched martensite with tetragonality by X-ray line profile analysis in a medium-carbon steelActa Materialia, 2022
- Dependence of solute carbon concentration on electrical resistivity of retained austeniteScripta Materialia, 2022
- Excess Solute Carbon and Retained Tetragonality in Tempered Fe-0.6C-1Mn Martensite and the Effect of Silicon AdditionMetallurgical and Materials Transactions A, 2021
- Excess Solute Carbon and Tetragonality in As-Quenched Fe-1Mn-C (C:0.07 to 0.8 Mass Pct) MartensiteMetallurgical and Materials Transactions A, 2020
- Formation of eta carbide in ferrous martensite by room temperature agingActa Materialia, 2018
- Chemistry and three-dimensional morphology of martensite-austenite constituent in the bainite structure of low-carbon low-alloy steelsActa Materialia, 2018
- Carbon partitioning during quenching and partitioning heat treatment accompanied by carbide precipitationActa Materialia, 2015
- Unambiguous carbon partitioning from martensite to austenite in Fe–C–Ni alloys during quenching and partitioningScripta Materialia, 2013
- Carbon Diffusion Measurement in Austenite in the Temperature Range 500 °C to 900 °CMetallurgical and Materials Transactions A, 2007
- Tempering of steelMetallurgical Transactions, 1972