Material Removal Capability and Profile Quality Assessment on Silicon Carbide Micropillar Fabrication with a Femtosecond Laser
Open Access
Abstract
Silicon carbide (SiC) has a variety of applications because of its favorable chemical stability and outstanding physical characteristics, such as high hardness and high rigidity. In this study, a femtosecond laser with a spiral scanning radial offset of 5 μm and a spot radius of 6 μm is utilized to process micropillars on a SiC plate. The influence of pulsed laser beam energies and laser translation velocities on the micropillar profiles, dimensions, surface roughness Ra, and material removal capability (MRC) of micropillars was investigated. The processing results indicate that the micropillar has the best perpendicularity, with a micropillar bottom angle of 75.59° under a pulsed beam energy of 50 μJ in the range of 10–70 μJ, with a pulsed repetition rate of 600 kHz and a translation velocity of 0.1 m/s. As the laser translation velocity increases between 0.2 m/s and 1.0 m/s under a fixed pulsed beam energy of 50 μJ and a constant pulsed repetition rate of 600 kHz, the micropillar height decreases from 119.88 μm to 81.79 μm, with the MRC value increasing from 1.998 μm3/μJ to 6.816 μm3/μJ, while the micropillar bottom angle increases from 68.87° to 75.59°, and the Ra value diminishes from 0.836 μm to 0.341 μm. It is suggested that a combination of a higher pulsed laser beam energy with a faster laser translation speed is recommended to achieve micropillars with the same height, as well as an improved processing efficiency and surface finish.Keywords
Funding Information
- National Natural Science Foundation of China (U20A20284, 52075323)
This publication has 28 references indexed in Scilit:
- Highly sensitive 4H-SiC pressure sensor at cryogenic and elevated temperaturesMaterials & Design, 2018
- UV nanosecond laser machining and characterization for SiC MEMS sensor applicationSensors and Actuators A: Physical, 2018
- Investigation and modelling of hybrid laser-waterjet micromachining of single crystal SiC wafers using response surface methodologyMaterials Science in Semiconductor Processing, 2017
- Microstructuring the surface of silicon carbide ceramic by laser action for reducing friction losses in rolling bearingsOptics & Laser Technology, 2017
- Review of Silicon Carbide Power Devices and Their ApplicationsIEEE Transactions on Industrial Electronics, 2017
- Area-Efficient Bevel-Edge Termination Techniques for SiC High-Voltage DevicesIEEE Transactions on Electron Devices, 2016
- Study of femtosecond ablation on aluminum film with 3D two-temperature model and experimental verificationsApplied Physics A, 2011
- Design of laser micromachined single crystal 6H–SiC diaphragms for high-temperature micro-electro-mechanical-system pressure sensorsMaterials & Design (1980-2015), 2011
- Silicon carbide nanowires: synthesis and cathodoluminescencePhysica Status Solidi (b), 2009
- Rayleigh range and the M^2 factor for Bessel–Gauss beamsApplied Optics, 1998