Surface Modification of Single‐Crystalline Ni‐Rich Cathode Materials with Gallium Oxide for High‐Voltage Electrochemical Cycling
Open Access
- 15 January 2026
- journal article
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 7 (1)
Abstract
Elongated lithium diffusion lengths, parasitic interfacial reactions, and rapid capacity fading continue to hinder the practical application of single‐crystalline Ni‐rich Li[Ni x Co y Mn 1− x − y ]O 2 (SC NCM) cathodes. Although existing surface modification strategies enhance electrochemical stability, high charge transfer resistance and low lithium diffusion result in poor cycling performance. In this work, a lithiophilic Ga 2 O 3 surface‐coated SC NCM material with 83% Ni content is synthesized for the first time via a wet chemical and postannealing route. The Ga 2 O 3 ‐coated material delivers 149.54 mAh g −1 with 57.33% retention after 300 cycles at 1 C over a potential window of 3.0–4.5 V. Compared to the uncoated counterpart, the modified material exhibits a 37.50% reduction in charge transfer resistance and a 79.20% increment in lithium diffusion. Moreover, the nonfaradaic electrochemical active surface area shows only a 1.1% reduction after extended cycling, suggesting effective interfacial stabilization and possible mitigation of HF‐induced surface degradation. These findings demonstrate that the surface modification of NCM materials with lithiophilic Ga‐based oxides is an effective strategy to enhance Li transport, suppress interfacial side reactions, which results in much improved electrochemical performance for next‐generation lithium‐ion batteries.Keywords
Funding Information
- Australian Research Council (DP250102887)
- Australian Research Council (DP250102885)
This publication has 88 references indexed in Scilit:
- Measuring Method of Electrochemically Active Surface Area in All‐Solid‐State Lithium‐Ion BatteriesBatteries & Supercaps, 2025
- Doping Effects on Ternary Cathode Materials for Lithium‐Ion Batteries: A ReviewChemphyschem, 2024
- Recent Advances in Liquid Metals for Rechargeable BatteriesAdvanced Functional Materials, 2023
- Recent Advances in Enhanced Performance of Ni‐Rich Cathode Materials for Li‐Ion Batteries: A ReviewEnergy Technology, 2022
- A Review of Degradation Mechanisms and Recent Achievements for Ni‐Rich Cathode‐Based Li‐Ion BatteriesAdvanced Energy Materials, 2021
- Robust Surface Reconstruction Induced by Subsurface Ni/Li Antisites in Ni‐Rich CathodesAdvanced Functional Materials, 2021
- Kinetic Limitations in Single‐Crystal High‐Nickel CathodesAngewandte Chemie International Edition, 2020
- Ni‐Rich/Co‐Poor Layered Cathode for Automotive Li‐Ion Batteries: Promises and ChallengesAdvanced Energy Materials, 2020
- Electrochemical Techniques in Battery Research: A Tutorial for NonelectrochemistsAdvanced Energy Materials, 2019
- Utilizing Room Temperature Liquid Metals for Mechanically Robust Silicon Anodes in Lithium‐Ion BatteriesBatteries & Supercaps, 2018