Model of the Secondary Path between the Input Voltage and the Output Force of an Active Engine Mount on the Engine Side
Open Access
- 28 March 2020
- journal article
- research article
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2020, 1-16
Abstract
The active engine mount (AEM) provides an effective solution to improve the acoustic and vibration comfort of a car. The same AEM can be installed for different engines and different vehicle bodies and attenuates the engine vibration, which is one of the most pressing challenges. To study this problem, this paper develops a mathematical model of a secondary path between the input voltage and output force of the AEM on the engine side considering the frequency-dependent characteristic of the stiffness, which includes the structure parameters of the AEM as well as the dynamics of the actuator, the fluid in the inertia track, the foundation (vehicle body), and the attenuated vibrating object (AEM preload or engine). The proposed model is validated by three test cases without vibration excitation, which are performed with different AEM preloads and foundations. The AEM is considered as an active part and passive part, the mass of which is determined experimentally. Parameter effect on the dynamic characteristics of the secondary path of the AEM is studied based on three tests and a numerical simulation.Keywords
Funding Information
- State Key Laboratory of Automotive Simulation and Control (2007220101002381)
- “863” National High Technology Research and Development Program (2007220101002381)
This publication has 37 references indexed in Scilit:
- Numerical and experimental analysis of harmonic distortion in a moving-coil loudspeakerCommunications in Nonlinear Science and Numerical Simulation, 2013
- Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubberConstruction and Building Materials, 2012
- Multi-input multi-output control of an automotive active engine mounting systemProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2011
- Performances and design of ironless loudspeaker motor structuresApplied Acoustics, 2010
- Model based feed-forward control of electromagnetic type active control engine-mount systemJournal of Sound and Vibration, 2009
- Analysis of powertrain motions given a combination of active and passive isolatorsNoise Control Engineering Journal, 2009
- A simplified methodology to predict the dynamic stiffness of carbon-black filled rubber isolators using a finite element codeJournal of Sound and Vibration, 2006
- A comparison of two adaptive algorithms for the control of active engine mountsJournal of Sound and Vibration, 2005
- Dynamic analysis and control of an active engine mount systemProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2002
- Development of an Active Control Engine Mount SystemVehicle System Dynamics, 1999