Wenku Shi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Wenku Shi has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Zhiyong Chen
Jilin University
9 shared publications - Henghai Zhang
State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China
5 shared publications - Guoyu Feng
School of Aviation Operations and Services, Aviation University of Air Force, Changchun 130022, China
2 shared publications Guozheng Liu
State Key Laboratory of Automotive Simulation and Control
2 shared publications- Helong Liu
State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun, China
2 shared publications - Qiaobin Liu
State Key Laboratory of Automotive Safety and Energy, School of Vehicle and Mobility, Tsinghua University, Beijing, China
2 shared publications
Latest Publications
- Open Access
A Novel State Estimation Approach for Suspension System with Time-Varying and Unknown Noise Covariance
In this paper, a novel state estimation approach based on the variational Bayesian adaptive Kalman filter (VBAKF) and road classification is proposed for a suspension system with time-varying and unknown noise covariance. Using the VB approach, the time-varying noise covariance can be inferred from the inverse-Wishart distribution and then optimized state estimation by the finite sampling posterior probability distribution function (PDF) of noise covariance and backward Kalman smoothing. In addition, a new road classification algorithm based on multi-objective optimization and the linear classifier is proposed to identify the unknown noise covariance. Simulation results for a suspension model with time-varying and unknown noise covariance show that the proposed approach has a higher performance in state estimation accuracy than other filters.
Open AccessA Novel State Estimation Approach for Suspension System with Time-Varying and Unknown Noise Covariance
In this paper, a novel state estimation approach based on the variational Bayesian adaptive Kalman filter (VBAKF) and road classification is proposed for a suspension system with time-varying and unknown noise covariance. Using the VB approach, the time-varying noise covariance can be inferred from the inverse-Wishart distribution and then optimized state estimation by the finite sampling posterior probability distribution function (PDF) of noise covariance and backward Kalman smoothing. In addition, a new road classification algorithm based on multi-objective optimization and the linear classifier is proposed to identify the unknown noise covariance. Simulation results for a suspension model with time-varying and unknown noise covariance show that the proposed approach has a higher performance in state estimation accuracy than other filters.
- Open Access
Modeling and Analysis of Clutch Nonlinear Behavior in an Automotive Driveline for Suppressing Torsional Vibration
Torsional vibration of the automotive driveline has significant influence on driving comfort. This study investigates the influence of clutch nonlinear behaviors on the torsional vibration of the driveline with numerical and experimental methods. A generic automobile powertrain model with 7 degrees of freedom is proposed considering the transient engine torque, the nonlinear characteristics of multi-stage clutch and tire slip. Taking a commercial vehicle as an example, the dynamic behaviors and inherent characteristics of the driveline system are calculated and analyzed. Based on the proposed model, the influences of the clutch parameters on driveline torsional vibration are investigated. In order to validate the proposed model and the analytical results, an optimized clutch is designed and the experiments of torsional vibration are conducted with the prototype and the optimized clutch. The analytical and experimental results demonstrate that an increase in the first end-stop angle and the main-stage hysteresis or a decrease in the second end-stop angle and the main-stage stiffness of the clutch can effectively suppress driveline torsional vibration during vehicle accelerating.
Open AccessModeling and Analysis of Clutch Nonlinear Behavior in an Automotive Driveline for Suppressing Torsional Vibration
Torsional vibration of the automotive driveline has significant influence on driving comfort. This study investigates the influence of clutch nonlinear behaviors on the torsional vibration of the driveline with numerical and experimental methods. A generic automobile powertrain model with 7 degrees of freedom is proposed considering the transient engine torque, the nonlinear characteristics of multi-stage clutch and tire slip. Taking a commercial vehicle as an example, the dynamic behaviors and inherent characteristics of the driveline system are calculated and analyzed. Based on the proposed model, the influences of the clutch parameters on driveline torsional vibration are investigated. In order to validate the proposed model and the analytical results, an optimized clutch is designed and the experiments of torsional vibration are conducted with the prototype and the optimized clutch. The analytical and experimental results demonstrate that an increase in the first end-stop angle and the main-stage hysteresis or a decrease in the second end-stop angle and the main-stage stiffness of the clutch can effectively suppress driveline torsional vibration during vehicle accelerating.
- Open Access
- 25 November 2021
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 13 (11)
Modeling and parameter identification of seated human body with the reference vector guided evolutionary algorithm
The low frequency vibration of the vehicle in motion has a great influence on the ride comfort of occupants. The research on the vibration response characteristics of human body plays a great role in analyzing and improving ride comfort. The purpose of this study was to investigate the parameter identification of seated human body dynamic model. A seven-degree-of-freedom (DOF) lumped parameter model was established to describe the vibration response characteristics of human body. The derivation processes of apparent mass (AM) and seat to head transmissibility (STHT) were performed. After the theoretical calculation of the human body vibration characteristics, we used several different evolutionary algorithms to identify the 23 parameters of the model, including the mass, stiffness and damping parameters. By comparing the results of the five optimization algorithms and comprehensively analyzing the convergence and distribution of the non-dominated solution set, we found that the reference vector guided evolutionary algorithm (RVEA) shows good competitiveness in solving many-objective optimization problem (MaOP), that is, parameter identification of seated human body model in this paper. The AM and STHT calculated by model identification were compared with their measured by experiment. The result shows that the selected seven-DOF model can well describe the vertical vibration characteristics of seated human body and the identification method used in this paper can accurately identify the parameters of lumped parameter model, which provides convenience for the establishment of a complete “road-vehicle-seat-human body” system dynamic model.
- 25 November 2021
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 13 (11)
Open AccessModeling and parameter identification of seated human body with the reference vector guided evolutionary algorithm
The low frequency vibration of the vehicle in motion has a great influence on the ride comfort of occupants. The research on the vibration response characteristics of human body plays a great role in analyzing and improving ride comfort. The purpose of this study was to investigate the parameter identification of seated human body dynamic model. A seven-degree-of-freedom (DOF) lumped parameter model was established to describe the vibration response characteristics of human body. The derivation processes of apparent mass (AM) and seat to head transmissibility (STHT) were performed. After the theoretical calculation of the human body vibration characteristics, we used several different evolutionary algorithms to identify the 23 parameters of the model, including the mass, stiffness and damping parameters. By comparing the results of the five optimization algorithms and comprehensively analyzing the convergence and distribution of the non-dominated solution set, we found that the reference vector guided evolutionary algorithm (RVEA) shows good competitiveness in solving many-objective optimization problem (MaOP), that is, parameter identification of seated human body model in this paper. The AM and STHT calculated by model identification were compared with their measured by experiment. The result shows that the selected seven-DOF model can well describe the vertical vibration characteristics of seated human body and the identification method used in this paper can accurately identify the parameters of lumped parameter model, which provides convenience for the establishment of a complete “road-vehicle-seat-human body” system dynamic model.
- Open Access
- 1 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 54888-54899
Stiffness Prediction and Analysis of Composite Leaf Springs
Composite leaf springs represent a key application of composite materials in the field of automotive lightweight materials. Stiffness, as a critical parameter of composite leaf springs, is closely related to the handling stability and ride comfort of automobiles. Therefore, this paper proposes an explicit theoretical model, which can consider the anisotropy of composite materials and detailed structure of the leaf spring, to predict the stiffness based on the law of energy conservation. The obtained results are verified against the results of the finite element method and bench test of basalt/epoxy samples. Moreover, the influence of the relevant design parameters on the stiffness is analyzed to provide guidance for the stiffness matching of composite leaf springs. The thickness of the composite leaf spring considerably influences its stiffness. As a key parameter representing the bearing capacity, the strength is closely related to the reliability of leaf springs. Based on the Tasi-Wu strength failure criterion, the influence of the relevant design parameters on the strength ratio of a composite leaf spring is analyzed under the constraint of stiffness. An increase in the width of the composite leaf spring enhances its bearing capacity when the stiffness is required to be within a certain range.
- 1 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 54888-54899
Open AccessStiffness Prediction and Analysis of Composite Leaf Springs
Composite leaf springs represent a key application of composite materials in the field of automotive lightweight materials. Stiffness, as a critical parameter of composite leaf springs, is closely related to the handling stability and ride comfort of automobiles. Therefore, this paper proposes an explicit theoretical model, which can consider the anisotropy of composite materials and detailed structure of the leaf spring, to predict the stiffness based on the law of energy conservation. The obtained results are verified against the results of the finite element method and bench test of basalt/epoxy samples. Moreover, the influence of the relevant design parameters on the stiffness is analyzed to provide guidance for the stiffness matching of composite leaf springs. The thickness of the composite leaf spring considerably influences its stiffness. As a key parameter representing the bearing capacity, the strength is closely related to the reliability of leaf springs. Based on the Tasi-Wu strength failure criterion, the influence of the relevant design parameters on the strength ratio of a composite leaf spring is analyzed under the constraint of stiffness. An increase in the width of the composite leaf spring enhances its bearing capacity when the stiffness is required to be within a certain range.
- Open Access
- 23 December 2020
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2020, 1-14
Improving Camper Comfort by Optimizing the Vibration Isolation of Air-Conditioning Compressor
Compressors are the main excitation source of vibration and noise in camper air-conditioning systems, which directly affects the NVH characteristics in campers. The vibration and noise reduction for camper comfort improvement can be implemented by the optimization method. This paper presents vibration and noise improvement in camper by systematically optimizing the vibration isolation performance of air-conditioning compressor. To analyze the compressor vibration characteristics, operational vibration tests under different conditions and modal identification are implemented. Based on the analysis results, a genetic algorithm is used to optimize the stiffness of the compressor vibration isolation element by the energy decoupling method (EDM). The stiffness, natural frequencies, and energy decoupling rate (EDR) of the compressor vibration isolation system (CVIS) are compared between preoptimization and postoptimization. The stiffness and strength characteristics of the optimized isolation system are verified by the finite element method. Operational vibration and noise tests of a camper are performed to validate the optimization effect. The improvement of camper comfort demonstrates that the proposed optimization procedure of CVIS is effective.
- 23 December 2020
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2020, 1-14
Open AccessImproving Camper Comfort by Optimizing the Vibration Isolation of Air-Conditioning Compressor
Compressors are the main excitation source of vibration and noise in camper air-conditioning systems, which directly affects the NVH characteristics in campers. The vibration and noise reduction for camper comfort improvement can be implemented by the optimization method. This paper presents vibration and noise improvement in camper by systematically optimizing the vibration isolation performance of air-conditioning compressor. To analyze the compressor vibration characteristics, operational vibration tests under different conditions and modal identification are implemented. Based on the analysis results, a genetic algorithm is used to optimize the stiffness of the compressor vibration isolation element by the energy decoupling method (EDM). The stiffness, natural frequencies, and energy decoupling rate (EDR) of the compressor vibration isolation system (CVIS) are compared between preoptimization and postoptimization. The stiffness and strength characteristics of the optimized isolation system are verified by the finite element method. Operational vibration and noise tests of a camper are performed to validate the optimization effect. The improvement of camper comfort demonstrates that the proposed optimization procedure of CVIS is effective.
- Open Access
- 22 June 2020
- Published by Wiley in Shock and Vibration
- Vol. 2020, 1-20
A Review on Model and Control of Electromagnetic Active Engine Mounts
The isolation of the body from engine vibration is the most challenging and disruptive vibrational problem. Active engine mounts (AEMs), especially electromagnetic AEMs, achieve a significant performance improvement in decreasing the wide frequency band vibration. Increasing research interest is necessary to provide the academic community with a guideline for electromagnetic AEMs. Therefore, the current review aims to comprehensively supplement the review of AEMs. The key reviews of electromagnetic AEMs focus on (1) general considerations of electromagnetic AEMs, (2) models, and (3) control strategies. This paper presents a review of the current status and developmental progress of AEMs. A theoretical model, a finite-element model, and the identification (or experimental modelling) of electromagnetic AEMs during the last 2 decades are then studied. Finally, control strategies, such as classical control, adaptive control, and two degree of freedom (2DOF) control, are discussed and compared. The main purpose of this paper is to meet the needs of researchers and engineers engaged in electromagnetic AEM analysis and control.
- 22 June 2020
- Published by Wiley in Shock and Vibration
- Vol. 2020, 1-20
Open AccessA Review on Model and Control of Electromagnetic Active Engine Mounts
The isolation of the body from engine vibration is the most challenging and disruptive vibrational problem. Active engine mounts (AEMs), especially electromagnetic AEMs, achieve a significant performance improvement in decreasing the wide frequency band vibration. Increasing research interest is necessary to provide the academic community with a guideline for electromagnetic AEMs. Therefore, the current review aims to comprehensively supplement the review of AEMs. The key reviews of electromagnetic AEMs focus on (1) general considerations of electromagnetic AEMs, (2) models, and (3) control strategies. This paper presents a review of the current status and developmental progress of AEMs. A theoretical model, a finite-element model, and the identification (or experimental modelling) of electromagnetic AEMs during the last 2 decades are then studied. Finally, control strategies, such as classical control, adaptive control, and two degree of freedom (2DOF) control, are discussed and compared. The main purpose of this paper is to meet the needs of researchers and engineers engaged in electromagnetic AEM analysis and control.
- Open Access
- 28 March 2020
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2020, 1-16
Model of the Secondary Path between the Input Voltage and the Output Force of an Active Engine Mount on the Engine Side
The active engine mount (AEM) provides an effective solution to improve the acoustic and vibration comfort of a car. The same AEM can be installed for different engines and different vehicle bodies and attenuates the engine vibration, which is one of the most pressing challenges. To study this problem, this paper develops a mathematical model of a secondary path between the input voltage and output force of the AEM on the engine side considering the frequency-dependent characteristic of the stiffness, which includes the structure parameters of the AEM as well as the dynamics of the actuator, the fluid in the inertia track, the foundation (vehicle body), and the attenuated vibrating object (AEM preload or engine). The proposed model is validated by three test cases without vibration excitation, which are performed with different AEM preloads and foundations. The AEM is considered as an active part and passive part, the mass of which is determined experimentally. Parameter effect on the dynamic characteristics of the secondary path of the AEM is studied based on three tests and a numerical simulation.
- 28 March 2020
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2020, 1-16
Open AccessModel of the Secondary Path between the Input Voltage and the Output Force of an Active Engine Mount on the Engine Side
The active engine mount (AEM) provides an effective solution to improve the acoustic and vibration comfort of a car. The same AEM can be installed for different engines and different vehicle bodies and attenuates the engine vibration, which is one of the most pressing challenges. To study this problem, this paper develops a mathematical model of a secondary path between the input voltage and output force of the AEM on the engine side considering the frequency-dependent characteristic of the stiffness, which includes the structure parameters of the AEM as well as the dynamics of the actuator, the fluid in the inertia track, the foundation (vehicle body), and the attenuated vibrating object (AEM preload or engine). The proposed model is validated by three test cases without vibration excitation, which are performed with different AEM preloads and foundations. The AEM is considered as an active part and passive part, the mass of which is determined experimentally. Parameter effect on the dynamic characteristics of the secondary path of the AEM is studied based on three tests and a numerical simulation.
- Open Access
- 1 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 74648-74678
Modeling and Analysis of Performance Degradation Data for Reliability Assessment: A Review
Reliability engineering plays an important role in the design, manufacture, maintenance, and replacement of industrial products. Over the last few decades, accelerated degradation testing (ADT) has been largely utilized to shorten test durations, reduce the samples needed, and provide sufficient degradation data to ensure the effective reliability assessment of the concerned products. Meanwhile, performance degradation modeling has been recognized as an essential approach to help researchers and producers understand the health conditions of the deteriorating systems. However, the diversity in reliability tests, degradation models, and statistical analysis techniques has increased the difficulty in selecting appropriate reliability assessment methods in specific scenarios. Besides, there are no systematic reviews focused on modeling and analysis of performance degradation data. Therefore, this paper aims to (1) present ADT fundamentals, including the basic theory, ADT methods, accelerated stress variables, type of acceleration models, as well as ADT optimization, (2) comprehensively review current states and future challenges in degradation modeling, (3) discuss the problem of model mis-specification and compare different approaches for parameter estimation, (4) highlight future opportunities and possible directions deserving further research.
- 1 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 74648-74678
Open AccessModeling and Analysis of Performance Degradation Data for Reliability Assessment: A Review
Reliability engineering plays an important role in the design, manufacture, maintenance, and replacement of industrial products. Over the last few decades, accelerated degradation testing (ADT) has been largely utilized to shorten test durations, reduce the samples needed, and provide sufficient degradation data to ensure the effective reliability assessment of the concerned products. Meanwhile, performance degradation modeling has been recognized as an essential approach to help researchers and producers understand the health conditions of the deteriorating systems. However, the diversity in reliability tests, degradation models, and statistical analysis techniques has increased the difficulty in selecting appropriate reliability assessment methods in specific scenarios. Besides, there are no systematic reviews focused on modeling and analysis of performance degradation data. Therefore, this paper aims to (1) present ADT fundamentals, including the basic theory, ADT methods, accelerated stress variables, type of acceleration models, as well as ADT optimization, (2) comprehensively review current states and future challenges in degradation modeling, (3) discuss the problem of model mis-specification and compare different approaches for parameter estimation, (4) highlight future opportunities and possible directions deserving further research.
- Open Access
- 15 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 63027-63035
Performance Degradation Prediction and Reliability Evaluation of Rubber Aging in Natural Environment Under Alternating Cyclic Thermal Load
With focus on predicting the degradation of rubber performance in the natural environment and evaluating its reliability, the distribution law of accelerated aging life is analysed through the accelerated aging test of hot oxygen. A Weibull distribution model is then established to verify the consistency of the accelerated aging mechanism. Through the constant stress accelerated aging test data, the aging characteristics of the rubber under alternating thermal stress load in the natural environment are inferred. The concept of thermal stress amplitude coefficient is proposed, and its numerical value is calculated by the combination of numerical simulation and single-peak curve fitting. Under the principle of time–temperature equivalence, the segmentation time equivalent method and the overall temperature equivalent method are employed to calculate the rubber performance degradation curve under natural environment aging conditions. Finally, according to the Weibull distribution, the aging reliability of the rubber over time is simulated. This research can provide reference for the aging reliability evaluation of products under alternating stress.
- 15 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 63027-63035
Open AccessPerformance Degradation Prediction and Reliability Evaluation of Rubber Aging in Natural Environment Under Alternating Cyclic Thermal Load
With focus on predicting the degradation of rubber performance in the natural environment and evaluating its reliability, the distribution law of accelerated aging life is analysed through the accelerated aging test of hot oxygen. A Weibull distribution model is then established to verify the consistency of the accelerated aging mechanism. Through the constant stress accelerated aging test data, the aging characteristics of the rubber under alternating thermal stress load in the natural environment are inferred. The concept of thermal stress amplitude coefficient is proposed, and its numerical value is calculated by the combination of numerical simulation and single-peak curve fitting. Under the principle of time–temperature equivalence, the segmentation time equivalent method and the overall temperature equivalent method are employed to calculate the rubber performance degradation curve under natural environment aging conditions. Finally, according to the Weibull distribution, the aging reliability of the rubber over time is simulated. This research can provide reference for the aging reliability evaluation of products under alternating stress.
- Open Access
- 1 January 2019
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2019 (1)
A Method to Solve the Stiffness of Double‐Row Tapered Roller Bearing
By analyzing the roller force, the nonlinear stiffness model of the double‐row tapered roller hub bearing is derived, and the method of solving the hub bearing stiffness matrix is summarized: if the displacement between the inner and outer rings is known, the stiffness of the hub bearing can be directly calculated. If only the external load of the hub bearing is known, the displacement of the hub bearing needs to be solved by numerical method, and then the stiffness of the hub bearing can be calculated. The improved Newton‐Raphson method is used to solve the stiffness matrix of the hub bearing. Three‐dimensional FE model of DRTRBs is presented and validated the proposed the stiffness matrix of the hub bearing. It is found that the radial stiffness of the hub bearing is greater than the axial stiffness. The stiffness of the hub bearing is greatly affected by the vertical force of the ground and the wheel driving torque, showing obvious nonlinearity. The smaller the vertical ground load and wheel driving torque, the greater the influence of vertical ground load and wheel driving torque on the hub bearing stiffness.
- 1 January 2019
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2019 (1)
Open AccessA Method to Solve the Stiffness of Double‐Row Tapered Roller Bearing
By analyzing the roller force, the nonlinear stiffness model of the double‐row tapered roller hub bearing is derived, and the method of solving the hub bearing stiffness matrix is summarized: if the displacement between the inner and outer rings is known, the stiffness of the hub bearing can be directly calculated. If only the external load of the hub bearing is known, the displacement of the hub bearing needs to be solved by numerical method, and then the stiffness of the hub bearing can be calculated. The improved Newton‐Raphson method is used to solve the stiffness matrix of the hub bearing. Three‐dimensional FE model of DRTRBs is presented and validated the proposed the stiffness matrix of the hub bearing. It is found that the radial stiffness of the hub bearing is greater than the axial stiffness. The stiffness of the hub bearing is greatly affected by the vertical force of the ground and the wheel driving torque, showing obvious nonlinearity. The smaller the vertical ground load and wheel driving torque, the greater the influence of vertical ground load and wheel driving torque on the hub bearing stiffness.