A Three‐Port Quadratic Step‐Up DC–DC Converter With High Gain and Continuous Input Current
- 13 January 2025
- journal article
- research article
- Published by Wiley in International Journal of Circuit Theory and Applications
Abstract
This article presents a new three‐port step‐up DC–DC converter with two input ports and one output terminal. This converter structure achieves a higher voltage conversion ratio and better switching device power (SDP) than its multi‐input counterpart circuits. Using the “quadratic” approach to reach high voltage gains and discarding coupled inductors from the topology have avoided voltage spikes on power switches, resulting in higher efficiency compared to other hard‐switched multi‐input counterparts. In addition, the proposed converter can transmit power from one or both inputs to the output, from the output to the inputs, or between the inputs. Besides, common ground and continuous input current for all input ports are two distinct features of the suggested topology that most multi‐input converter structures lack. This paper thoroughly explains the converter operation and confirms its performance using laboratory experiments on a 200‐W hardware prototype. This new topology has been compared with existing competitors, considering several indicators. Comparative studies show that the proposed topology outperforms in terms of gain and SDP. Laboratory results validate the above achievements and exhibit that the maximum achievable efficiency by this method is 94.1%. This converter is suggested for electric vehicles and microgrid applications.Keywords
This publication has 34 references indexed in Scilit:
- A novel multi-input medium-gain DC-DC boost converter with soft-switching performanceInternational Journal of Electrical Power & Energy Systems, 2023
- A review of multiple input DC-DC converter topologies linked with hybrid electric vehicles and renewable energy systemsRenewable and Sustainable Energy Reviews, 2021
- Modular non‐isolated multi‐input high step‐up dc–dc converter with reduced normalised voltage stress and component countIET Power Electronics, 2018
- Design and analysis of a novel SEPIC‐based multi‐input DC/DC converterIET Power Electronics, 2017
- Non‐isolated multiple‐input boost converter for energy harvestingElectronics Letters, 2017
- Multi-input DC/DC converters in connection with distributed generation units – A reviewRenewable and Sustainable Energy Reviews, 2016
- Non‐isolated multi‐input–single‐output DC/DC converter for photovoltaic power generation systemsIET Power Electronics, 2014
- Multi‐input voltage‐summation converter based on switched‐capacitorIET Power Electronics, 2013
- Integrated magnetics based multi-port bidirectional DC–DC converter topology for discontinuous-mode operationIET Power Electronics, 2012
- Dual-input isolated full-bridge boost dc–dc converter based on the distributed transformersIET Power Electronics, 2012