A Facile Surface Modification Strategy for Antibody Immobilization on 3D-Printed Surfaces
Open Access
- 25 March 2025
- journal article
- research article
- Published by MDPI AG in Biosensors
- Vol. 15 (4) , 211
Abstract
3D-printed microdevices have become increasingly important to the advancement of point-of-care (POC) immunoassays. Despite its great potential, using 3D-printed surfaces on the solid support for immunorecognition has been limited due to the non-ideal adsorption properties for many photocurable resins. In this work, we report a simple surface modification protocol that works for diverse commercial photocurable resins, improving ELISAs performed directly on 3D-printed devices. This surface modification strategy involves surface activation via air plasma followed by the one-step incubation of GLYMO-labeled streptavidin. We successfully immobilized biotinylated anti-activin A antibodies on the 3D-printed surfaces and performed the complete ELISA protocol on the 3D-printed surfaces. We demonstrated that this protocol achieved an improved performance over passive adsorption for ELISAs. The present method is also compatible with diverse commercial resins and works with both microwells and microchannels. Finally, this method demonstrated a comparable limit of detection to the ELISA performed using commercial microwells. We believe the simplicity and broad compatibility of the present surface modification strategy will facilitate the development of 3D-printed POC ELISA devices.Keywords
Funding Information
- Division of Electrical, Communications and Cyber Systems (ECCS-2144216)
This publication has 38 references indexed in Scilit:
- 3D Printing in Biocatalysis and Biosensing: From General Concepts to Practical ApplicationsChemistry – An Asian Journal, 2024
- A review of the recent achievements and future trends on 3D printed microfluidic devices for bioanalytical applicationsAnalytica Chimica Acta, 2024
- New conductive filament ready-to-use for 3D-printing electrochemical (bio)sensors: Towards the detection of SARS-CoV-2Analytica Chimica Acta, 2021
- Recent Advances in 3D Printing of Biomedical Sensing DevicesAdvanced Functional Materials, 2021
- 3D-printed electrode as a new platform for electrochemical immunosensors for virus detectionAnalytica Chimica Acta, 2021
- Antibody Micropatterned Lubricant‐Infused Biosensors Enable Sub‐Picogram Immunofluorescence Detection of Interleukin 6 in Human Whole PlasmaSmall, 2020
- Combination of electrochemical biosensor and textile threads: A microfluidic device for phenol determination in tap waterBiosensors and Bioelectronics, 2018
- Stereolithography-Based 3D Printed “Pillar Plates” that Minimizes Fluid Transfers During Enzyme Linked Immunosorbent AssaysAnnals of Biomedical Engineering, 2016
- Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a ReviewElectroanalysis, 2016
- Surface characterization of air plasma treated poly vinylidene fluoride and poly methyl methacrylate filmsPolymer Engineering & Science, 2009