Influence of Cyclic Loading on Physical and Mechanical Properties of Thin-Film Membrane Structures
Authors:
- 1 April 2024
- journal article
- research article
- Published by Pleiades Publishing Ltd in Mechanics of Solids
- Vol. 59 (2) , 746-753
Abstract
The principle of modifying the mechanical properties of thin-film membrane structures of arbitrary shape by a non-contact method was proposed, implemented and explained for the first time. The idea was tested on a thin-film aluminum membrane formed by the magnetron method on a silicon substrate. The external influence was carried out through a cyclic load in the form of releasing and supplying excess air pressure to the membrane. As a result of repeated impacts, the physical properties of materials (grain size and roughness) and mechanical properties (internal mechanical stresses and critical overpressure) change. Changing the magnitude of residual mechanical stresses in the membrane material allows the formation of a surface with the required curvature value. In this work, after a cyclic load with a pressure equal to half the critical pressure, the following effects were revealed: the deflection of the membrane in the absence of external influence increased by more than an order of magnitude, the structure passed into a plastic type of deformation, the critical burst pressure decreased by several tens of percent. The use of this methodology makes it possible to create new materials with unique mechanical properties.Keywords
This publication has 18 references indexed in Scilit:
- Autonomous healing of fatigue cracks via cold weldingNature, 2023
- Dependence of Mechanical Stresses in Silicon Nitride Films on the Mode of Plasma-Enhanced Chemical Vapor DepositionSemiconductors, 2018
- SiC-Based Composite Materials Obtained by Siliconizing Carbon MatricesTechnical Physics, 2017
- History-independent cyclic response of nanotwinned metalsNature, 2017
- Synergistic effect of environmental media and stress on the fatigue fracture behaviour of aluminium alloysFatigue & Fracture of Engineering Materials & Structures, 2016
- The inverse hall–petch relation in nanocrystalline metals: A discrete dislocation dynamics analysisJournal of the Mechanics and Physics of Solids, 2016
- Measurements for Mechanical Reliability of Thin Films2009
- Fatigue behavior of AA7075-T6 aluminum alloy coated with ZrN by PVDInternational Journal of Fatigue, 2008
- Fatigue And Fracture Behavior2008
- Effect of film thickness and grain size on fatigue-induced dislocation structures in Cu thin filmsPhilosophical Magazine Letters, 2003