Calibration of DEM Contact Parameters for High-Moisture Rabbit Manure Using the Hertz–Mindlin with a JKR Model and a Three-Stage Optimization Strategy
Open Access
- 17 April 2026
- journal article
- research article
- Published by MDPI AG in Agriculture
- Vol. 16 (8) , 891
Abstract
Rabbit manure with high-moisture content exhibits complex adhesive and flow behaviors, which make accurate parameterization in discrete element method (DEM) simulations difficult. To improve the reliability of DEM modeling for rabbit manure composting processes, this study calibrated the contact parameters of rabbit manure at 65% moisture content using the angle of repose as the target response. A physical angle of repose test was first conducted using the cylindrical lifting method, yielding a measured value of 38.77°. The Hertz–Mindlin with Johnson–Kendall–Roberts (JKR) contact model was then adopted to represent the adhesive behavior of the material, and a three-stage optimization strategy consisting of a Plackett–Burman screening test, a steepest ascent test, and a Box–Behnken design was applied to identify and optimize the key parameters. The results showed that the particle restitution coefficient, rabbit manure–PLA rolling friction coefficient, and surface energy were the dominant factors affecting the angle of repose. The optimal parameter combination was a particle restitution coefficient of 0.56, a rabbit manure–PLA rolling friction coefficient of 0.375, and a surface energy of 0.243 J/m2. Under these conditions, the simulated angle of repose was 39.21°, with a relative error of 1.13%. These calibrated parameters provide a reliable basis for DEM simulation and engineering optimization of rabbit manure composting equipment.Keywords
Funding Information
- Department of Science and Technology of the Ministry of Agriculture and Rural Affairs of the People’s Republic of China (CARS-43-D-3)
This publication has 41 references indexed in Scilit:
- Composting as a pathway for organic waste valorization: substrate performance, process strategies, and quality benchmarksJournal of Material Cycles and Waste Management, 2026
- Agricultural processes simulation using discrete element method: a reviewComputers and Electronics in Agriculture, 2025
- Bionic stirring device for horizontal composter to improve aeration efficiency: Design and optimisation using discrete and finite element methodsComputers and Electronics in Agriculture, 2024
- DEM calibration for simulating bulk cohesive materialsComputers and Geotechnics, 2023
- 3D printing of polylactic acid: recent advances and opportunitiesThe International Journal of Advanced Manufacturing Technology, 2023
- Poly(lactic acid) (PLA)-based mulch films: evaluation of mechanical, thermal, barrier properties and aerobic biodegradation characteristics in real-time environmentPolymer Bulletin, 2022
- Organic matter and nitrogen balance in rabbit fattening and gaseous emissions during manure storage and simulated land applicationAgriculture, Ecosystems & Environment, 2019
- DEM simulations: mixing of dry and wet granular material with different contact anglesGranular Matter, 2018
- Micromechanical analysis of cohesive granular materials using the discrete element method with an adhesive elasto-plastic contact modelGranular Matter, 2014
- Discrete element modeling of machine–manure interactionsComputers and Electronics in Agriculture, 2006