Effect of Replacing Feldspar by Philippine Black Cinder on the Development of Low-Porosity Red Stoneware
Authors:
- Fel Jane A. EchavezFEFel Jane A. Echavez
- Liberty R. LumasagLiberty R. Lumasag
- Beverly L. BatoBeverly L. Bato
- Alyssa May Rabadon SimplicioASAlyssa May Rabadon Simplicio
- Jade P. CahigaoJade P. Cahigao
- Elly U. AlignoEAElly U. Aligno
- Roben Victor M. DispoRoben Victor M. Dispo
- Sherlyn Keh D. DionioSDSherlyn Keh D. Dionio
- Christian Julle C. SaladagaChristian Julle C. Saladaga
- Raymond V. Rivera VirtudazoRVRaymond V. Rivera Virtudazo
- Ivyleen C. Bernardo-ArugayIvyleen C. Bernardo-Arugay
Open Access
Abstract
Stoneware is a ceramic material with low porosity and high mechanical properties, such as the modulus of rupture. It is essentially made of clay, feldspar and quartz and is sintered to create a mixture of glass and crystalline phases. With the projected growth rate of the global ceramics market size and the country’s development plan for 2023–2028, it is imperative that alternative raw materials for the manufacture of ceramic products be sourced so that the importation of these materials, such as feldspar, be minimized, if not eliminated. Cinder in the Philippines is mainly used as a filling material in pavements and residential areas. In this study, this resource is utilized as partial and full replacement of feldspar in a typical ternary diagram for stoneware production. Bars were formed from different formulations by the slip casting method and were sintered at 1200 °C. Physical and mechanical properties of the bars, such as shrinkage, loss on ignition, water absorption, apparent porosity and modulus of rupture were determined. Thermo-physical analyses were also carried out on the raw materials and on formulated powders. Meeting the requirements of the various quality standards for ceramics, the partial replacement of feldspar with black cinder (LF, LFBQ and LFBH) is feasible for wall and roof applications while full replacement of feldspar with black cinder (LB) is suitable for wider use as wall, floor, vitrified, industrial and roof tiles.Keywords
Funding Information
- Department of Science and Technology, Philippine Council for Industry, Energy, and Emerging Technology Research and Development (DOST-PCIEERD) (7374)
This publication has 43 references indexed in Scilit:
- Effect of moulding pressure on microstructure and technological properties of porcelain stonewareCeramics International, 2012
- The vitreous phase of porcelain stoneware: Composition, evolution during sintering and physical propertiesJournal of Non-Crystalline Solids, 2011
- A study of the sintering of diatomaceous earth to produce porous ceramic monoliths with bimodal porosity and high strengthPowder Technology, 2010
- Developing of Ceramic Roof Tiles Process by Powder Pressing and Firing in Roller KilnMaterials Science Forum, 2008
- Recycling of CRT panel glass as fluxing agent in the porcelain stoneware tile productionCeramics International, 2008
- Development of ceramic tiles from coal fly ash and tincal ore wasteCeramics International, 2005
- Partial substitution of feldspar by B.F. slag in triaxial porcelain: Phase and microstructural evolutionJournal of the European Ceramic Society, 2004
- Formation of Nontronite from Oxidative Dissolution of Pyrite Disseminated in Precambrian Felsic Metavolcanics of the Southern Iberian Massif (Spain)Clays and Clay Minerals, 2004
- Hydration of a Portland cement blended with calcium carbonateThermochimica Acta, 2000
- Mineralogical composition of the clay bodies used in the Italian tile industryApplied Clay Science, 1989