Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fel Jane A. Echavez has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of Replacing Feldspar by Philippine Black Cinder on the Development of Low-Porosity Red Stoneware

    by Fel Jane A. Echavez, Liberty R. Lumasag, Beverly L. Bato, Alyssa May Rabadon Simplicio, Jade P. Cahigao, Elly U. Aligno, Roben Victor M. Dispo, Sherlyn Keh D. Dionio, Christian Julle C. Saladaga, Raymond V. Rivera Virtudazo, et al.

    Stoneware is a ceramic material with low porosity and high mechanical properties, such as the modulus of rupture. It is essentially made of clay, feldspar and quartz and is sintered to create a mixture of glass and crystalline phases. With the projected growth rate of the global ceramics market size and the country’s development plan for 2023–2028, it is imperative that alternative raw materials for the manufacture of ceramic products be sourced so that the importation of these materials, such as feldspar, be minimized, if not eliminated. Cinder in the Philippines is mainly used as a filling material in pavements and residential areas. In this study, this resource is utilized as partial and full replacement of feldspar in a typical ternary diagram for stoneware production. Bars were formed from different formulations by the slip casting method and were sintered at 1200 °C. Physical and mechanical properties of the bars, such as shrinkage, loss on ignition, water absorption, apparent porosity and modulus of rupture were determined. Thermo-physical analyses were also carried out on the raw materials and on formulated powders. Meeting the requirements of the various quality standards for ceramics, the partial replacement of feldspar with black cinder (LF, LFBQ and LFBH) is feasible for wall and roof applications while full replacement of feldspar with black cinder (LB) is suitable for wider use as wall, floor, vitrified, industrial and roof tiles.


  • Open Access

    Evaluation of Linamon Red Clay, Salvador Black Cinder and Kapatagan Diatomaceous Earth of the Southern Philippines

    by Ivyleen C. Bernardo-Arugay, Fel Jane A. Echavez, Liberty R. Lumasag, Jade P. Cahigao, Elly U. Aligno, Roben Victor M. Dispo, Sherlyn Keh D. Dionio, Christian Julle C. Saladaga, Beverly L. Bato, Alyssa May Rabadon Simplicio, et al.

    The southern island of the Philippines is abundant in silicate minerals, including the province of Lanao del Norte. However, some of these resources in the region are untapped for use as raw materials in the production of various ceramic products for industrial, pharmaceutical, and nanotechnology applications. These could include tiles, sanitary ware, dinnerware, insulating bricks, porcelain, membranes and coatings. Some of the explored minerals are the red clay in the municipality of Linamon, diatomaceous earth in Kapatagan and black cinder in Salvador. It is the aim of this study that these minerals are evaluated in terms of their physical and chemical properties so that these will be used for optimum application. The properties that were determined were their specific gravities, raw and fired surface colors, Atterberg limits, particle size distribution, thermal properties, morphologies and mineralogical compositions. Pellets were formed for each raw material and fired at two temperature levels 1000 °C and 1200 °C to evaluate their physical properties. Linamon red clay has a 38.88% cumulative passing size of 150 µm, and the black cinder of Salvador and diatomaceous earth of Kapatagan have cumulative passing sizes of 96.53% and 60.12% at 150-micron sieve, respectively. The common mineral contents of the three samples are montmorillonite, quartz and andesine. Black cinder fired at 1200 °C has the darkest shade of red with a greasy quasi-submetallic luster. It attained the highest fusion coverage on the platform among the three materials, which makes it a potential supplement or replacement for feldspar in clay-based triaxial materials for ceramic production. The diatomaceous earth has the potential to be a secondary clay content source and a good source of flux for a certain temperature range. Both the red clay and diatomaceous earth were classified as plastic materials that are suitable for brick production, and the red clay is also feasible for pottery production. These are a few of the features of the clay minerals in the region that present suitable properties for application as raw materials in the production of ceramic tiles and hollow ceramic products.


  • Open Access

    Development of Ceramic Tiles from Philippine Nickel Laterite Mine Waste by Ceramic Casting Method

    by Ivyleen C. Bernardo-Arugay, Fel Jane A. Echavez, Rae Homer L. Aquiatan, Carlito B. Tabelin, Raymond V. Rivera Virtudazo, Vannie Joy T. Resabal

    Siltation is the biggest environmental challenge associated with nickel laterite mining in the Philippines. The amount of silt generated is huge and one mitigation strategy currently employed by the mining companies is the construction of siltation ponds where the bulk of the clayey- and silt-sized surface runoffs is collected. However, this poses several serious environmental hazards such as landslides due to heavy rainfall and the potential release of hazardous heavy metals. A promising approach to reduce the risks associated with long-term storage of nickel mine waste (NMW) is to employ circular economy by repurposing it for ceramic applications. While generating useful materials with economic value out of a mine waste, it will result in a reduction in volume of waste for disposal. In this study, the method employed to produce NMW-based ceramic wall and floor tiles is slip casting as it is the most appropriate method in forming tiles with complex surface features. Five formulations of NMW-based slips were made for the casting of ceramic tiles and each slip was characterized for its suitability as raw material. The results of NMW characterization show that NMW could be utilized as raw materials for both ceramic wall and floor tiles and the addition of feldspar can enhance casting and physical properties.