Structure‐property investigations on a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications Part I: Local gradients in microstructure, hardness and strength
Authors:
- 18 August 2009
- journal article
- research article
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 40 (8) , 623-633
Abstract
Sheets of AA6056 and Ti6Al4V were butt‐joined by inserting the Ti‐sheet into the profiled Al‐sheet and by melting the Al‐alloy alone using a split beam Nd:YAG laser. To study microstructural effects on properties, the Al‐alloy was used in two tempers; T4 followed by post weld heat treatment T6, and in T6 followed by a defined duration of natural ageing at room temperature. As a basic step for fatigue and fracture investigations, local gradients in properties of this dissimilar joint are investigated using microscopy, hardness and tensile tests. Possible sites, from which fracture may initiate, have been then identified. All property changes are found to confine to the aluminium side. An intermetallic layer, although very thin, is found to form on the interface. The changeovers, firstly between the fusion zone and the heat affected zone and secondly between the heat affected zone and the base material, are found to be associated with changes in microstructure, hardness and strength. These are identified as the possible critical sites in addition to the interface.Keywords
This publication has 33 references indexed in Scilit:
- Z-contrast imaging of the arrangement of Cu in precipitates in 6XXX-series aluminium alloysPhilosophical Magazine Letters, 2006
- Interfacial reaction in steel–aluminum joints made by friction stir weldingScripta Materialia, 2006
- Heat Treatment Effect on Properties of Al-Mg-Si-Cu 1370 AlloyMaterials Science Forum, 2006
- Mechanical and microstructural characteristics of laser welded titanium–aluminium jointsWelding International, 2005
- Microstructure characteristics in the interface zone of Ti/Al diffusion bondingMaterials Letters, 2002
- Microstructural Study of Laser Welds Al6056-AS12 in Relation with Hot TearingMaterials Science Forum, 2002
- Light-weight structures produced by laser beam joining for future applications in automobile and aerospace industryJournal of Materials Processing Technology, 2001
- Aluminium Structures Used in Aerospace - Status and Prospects-Materials Science Forum, 1997
- Welding of aluminium to dissimilar metalsWelding International, 1996
- Porosity in aluminium weldsWelding International, 1992