W. V. Vaidya
Research Subjects
W. V. Vaidya has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
M. Horstmann
GKSS Research Centre Geesthacht, Institute of Materials Research, Materials Mechanics, Max-Planck-Strasse 1, D-21502 Geesthacht, Germany
3 shared publicationsM. Koçak
GKSS Research Centre Geesthacht, Institute of Materials Research, Materials Mechanics, Max-Planck-Strasse 1, D-21502 Geesthacht, Germany
3 shared publicationsB. Petrovski
GKSS Research Centre Geesthacht, Institute of Materials Research, Materials Mechanics, Max-Planck-Strasse 1, D-21502 Geesthacht, Germany
2 shared publicationsG. Tempus
AIRBUS Deutschland GmbH, Metal Technology, Bremen, Germany
2 shared publicationsR. Kocik
AIRBUS Deutschland GmbH, Metal Technology, Bremen, Germany
2 shared publicationsV. Ventzke
GKSS Research Centre Geesthacht, Institute of Materials Research, Materials Mechanics, Max-Planck-Strasse 1, D-21502 Geesthacht, Germany
2 shared publications
Latest Publications
- 26 June 2010
- Published by Springer Nature in Journal of Materials Science
- Vol. 45 (22) , 6242-6254
Improving interfacial properties of a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications
- 26 June 2010
- Published by Springer Nature in Journal of Materials Science
- Vol. 45 (22) , 6242-6254
Improving interfacial properties of a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications
- 20 October 2009
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 40 (10) , 769-779
Structure‐property investigations on a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications. Part II: Resistance to fatigue crack propagation and fracture
- 20 October 2009
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 40 (10) , 769-779
Structure‐property investigations on a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications. Part II: Resistance to fatigue crack propagation and fracture
- 18 August 2009
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 40 (8) , 623-633
Structure‐property investigations on a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications Part I: Local gradients in microstructure, hardness and strength
Sheets of AA6056 and Ti6Al4V were butt‐joined by inserting the Ti‐sheet into the profiled Al‐sheet and by melting the Al‐alloy alone using a split beam Nd:YAG laser. To study microstructural effects on properties, the Al‐alloy was used in two tempers; T4 followed by post weld heat treatment T6, and in T6 followed by a defined duration of natural ageing at room temperature. As a basic step for fatigue and fracture investigations, local gradients in properties of this dissimilar joint are investigated using microscopy, hardness and tensile tests. Possible sites, from which fracture may initiate, have been then identified. All property changes are found to confine to the aluminium side. An intermetallic layer, although very thin, is found to form on the interface. The changeovers, firstly between the fusion zone and the heat affected zone and secondly between the heat affected zone and the base material, are found to be associated with changes in microstructure, hardness and strength. These are identified as the possible critical sites in addition to the interface.
- 18 August 2009
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 40 (8) , 623-633
Structure‐property investigations on a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications Part I: Local gradients in microstructure, hardness and strength
Sheets of AA6056 and Ti6Al4V were butt‐joined by inserting the Ti‐sheet into the profiled Al‐sheet and by melting the Al‐alloy alone using a split beam Nd:YAG laser. To study microstructural effects on properties, the Al‐alloy was used in two tempers; T4 followed by post weld heat treatment T6, and in T6 followed by a defined duration of natural ageing at room temperature. As a basic step for fatigue and fracture investigations, local gradients in properties of this dissimilar joint are investigated using microscopy, hardness and tensile tests. Possible sites, from which fracture may initiate, have been then identified. All property changes are found to confine to the aluminium side. An intermetallic layer, although very thin, is found to form on the interface. The changeovers, firstly between the fusion zone and the heat affected zone and secondly between the heat affected zone and the base material, are found to be associated with changes in microstructure, hardness and strength. These are identified as the possible critical sites in addition to the interface.
- 11 May 2006
- Published by Wiley in Advanced Engineering Materials
- Vol. 8 (5) , 399-406
Assessment of Fracture and Fatigue Crack Propagation of Laser Beam and Friction Stir Welded Aluminium and Magnesium Alloys
The new joining technologies and the development of new weldable alloys open perspectives for weight and cost savings in the aerospace and the automotive industries. However, fulfilment of property requirements can be a limiting factor for the application of such new technologies. In this paper we present our results from some recent and on‐going investigations on the damage tolerance of 6XXX aerospace Al‐alloys and AZ31B Mg‐alloy, welded by using laser beam and friction stir processes. Particular emphasis is placed on fatigue crack propagation and fracture behaviour, and future areas for research in the damage tolerance behaviour of the strength undermatched Al‐welds are identified while outlining possible solutions.
- 11 May 2006
- Published by Wiley in Advanced Engineering Materials
- Vol. 8 (5) , 399-406
Assessment of Fracture and Fatigue Crack Propagation of Laser Beam and Friction Stir Welded Aluminium and Magnesium Alloys
The new joining technologies and the development of new weldable alloys open perspectives for weight and cost savings in the aerospace and the automotive industries. However, fulfilment of property requirements can be a limiting factor for the application of such new technologies. In this paper we present our results from some recent and on‐going investigations on the damage tolerance of 6XXX aerospace Al‐alloys and AZ31B Mg‐alloy, welded by using laser beam and friction stir processes. Particular emphasis is placed on fatigue crack propagation and fracture behaviour, and future areas for research in the damage tolerance behaviour of the strength undermatched Al‐welds are identified while outlining possible solutions.