Crosslinked sulfonated poly(arylene ether ketone) with pendant carboxylic acid group via poly(ethylene glycol) for proton exchange membrane
- 14 July 2010
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 118 (6) , 3318-3323
Abstract
Novel proton exchange membranes are solvent‐cast from N,N‐dimethylacetamide (DMAc) solutions of the crosslinked poly(arylene ether ketone) copolymer with pendant carboxylic acid group (C‐SPAEK) via poly(ethylene glycol) (PEG) with different amounts. These membranes are formed as a result of physical and chemical crosslinking. In this study, 1H‐NMR and FTIR have been used to confirm the chemical structures of the copolymers. Mechanical and thermal properties, swelling and proton conductivity are affected by the crosslinker (PEG) content in the copolymers. Compared to the noncrosslinked C‐SPAEK membrane, the crosslinked membranes become more flexible and greatly reduced water uptake and swelling ratio with only slight sacrifice in proton conductivities. And the crosslinked membranes keep higher proton conductivities without a sharply decrease at higher temperature. These results show that the crosslinked membranes have potential applications as proton exchange membranes for fuel cell. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010Keywords
This publication has 28 references indexed in Scilit:
- Synthesis and characterization of novel sulfonated poly(arylene ether ketone) copolymers with pendant carboxylic acid groups for proton exchange membranesJournal of Power Sources, 2009
- Crosslinked SPEEK/AMPS blend membranes with high proton conductivity and low methanol diffusion coefficient for DMFC applicationsJournal of Power Sources, 2007
- Physically and Chemically Cross‐Linked Poly{[(maleic anhydride)‐alt‐styrene]‐co‐(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)}/Poly(ethylene glycol) Proton‐Exchange MembranesMacromolecular Chemistry and Physics, 2007
- Chemical and radiation crosslinked polymer electrolyte membranes prepared from radiation-grafted ETFE films for DMFC applicationsJournal of Power Sources, 2006
- Functional fluoropolymers for fuel cell membranesProgress in Polymer Science, 2005
- Synthesis and Proton Conductivity of Partially Sulfonated Poly([vinylidene difluoride-co-hexafluoropropylene]-b-styrene) Block CopolymersMacromolecules, 2005
- Direct synthesis of sulfonated aromatic poly(ether ether ketone) proton exchange membranes for fuel cell applicationsJournal of Membrane Science, 2004
- Pervaporation separation of water–ethanol mixtures using metal‐ion‐exchanged poly(vinyl alcohol) (PVA)/sulfosuccinic acid (SSA) membranesJournal of Applied Polymer Science, 2002
- Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranesJournal of Membrane Science, 2002
- On the development of proton conducting polymer membranes for hydrogen and methanol fuel cellsJournal of Membrane Science, 2001