Fabrication of Inner Grooved Hollow Fiber Membranes Using Microstructured Spinneret for Nerve Regeneration
- 13 September 2017
- journal article
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 139 (11) , 111007
Abstract
Nerve conduits with topographical guidance have been recognized as the efficient repair of damaged peripheral nerves. In this study, polymeric hollow fiber membranes (HFMs) with grooved inner surface have been fabricated from a microstructured spinneret using a dry-jet wet spinning process for nerve regeneration studies. The effectiveness of HFM inner grooves has been demonstrated during an in vitro study of chick forebrain neuron outgrowth. It is of great importance that the groove geometry can be controllable to meet various needs in promoting nerve regeneration performance. While the overall groove geometry is determined by the spinneret design, fabrication conditions are also indispensable in fine-tuning the final groove geometry such as the groove height and width on the order of 10 μm or less. It is found that the bore fluid flow rate can be utilized to effectively adjust the resulting groove height by at most 52% and groove width by at most 61%, respectively, without modifying the spinneret geometry. This enables a new approach to fabricate different grooved HFMs using the same spinneret. By comparing to the influences of bore fluid flow rate, the dope fluid flow rate is less effective in regulating the groove height and width when using the same microstructured spinneret. Both bore and dope fluid flow rates should be carefully selected for fine groove width tuning.Keywords
This publication has 39 references indexed in Scilit:
- The fundamental role of subcellular topography in peripheral nerve repair therapiesBiomaterials, 2012
- A biomaterials approach to peripheral nerve regeneration: bridging the peripheral nerve gap and enhancing functional recoveryJournal of The Royal Society Interface, 2011
- Flat and tubular membrane systems for the reconstruction of hippocampal neuronal networkJournal of Tissue Engineering and Regenerative Medicine, 2011
- Investigation of Inner Surface Groove Formation Under Radially Inward Pressure During Immersion Precipitation-Based Hollow Fiber Membrane FabricationJournal of Manufacturing Science and Engineering, 2011
- Effect of surface roughness of hollow fiber membranes with gear-shaped structure on membrane fouling by sodium alginateJournal of Membrane Science, 2011
- Topography, Cell Response, and Nerve RegenerationAnnual Review of Biomedical Engineering, 2010
- Microstructured hollow fibers for ultrafiltrationJournal of Membrane Science, 2010
- A Novel Approach to Align Adult Neural Stem Cells on Micropatterned Conduits for Peripheral Nerve Regeneration: A Feasibility StudyArtificial Organs, 2009
- Formation of Highly Aligned Grooves on Inner Surface of Semipermeable Hollow Fiber Membrane for Directional Axonal OutgrowthJournal of Manufacturing Science and Engineering, 2008
- Fabrication and evaluation of microgrooved polymers as peripheral nerve conduitsBiomedical Microdevices, 2007