Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
Authors:
- Yuzhnoye State Design OfficeYOYuzhnoye State Design Office
- Ihor I. DereviankoIDIhor I. Derevianko
- Kostiantyn V. AvramovKAKostiantyn V. Avramov
- Anatolii Pidhornyi Institute of Power Machines and Systems of NAS of UkraineAUAnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
- Borys V. UspenskyiBUBorys V. Uspenskyi
- Oleksandr F. SalenkoOSOleksandr F. Salenko
- National Technical University of Ukraine Igor Sikorsky Kyiv Polytechnic InstituteNINational Technical University of Ukraine Igor Sikorsky Kyiv Polytechnic Institute
Open Access
- 30 September 2024
- journal article
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Journal of Mechanical Engineering
- Vol. 27 (3) , 25-33
Abstract
The use of thin-walled constructions with honeycomb structure manufactured using additive technologies has several advantages compared to the constructions manufactured using traditional technologies. First of all, this is explained by the fact that additive technologies greatly simplify the production of honeycomb structures. A technology for manufacturing a three-layer composite plate with a honeycomb structure obtained using additive technologies is proposed in the paper. PLA plastic was chosen as the material for the honeycomb structure production. Printing was carried out using a "Delta" printer with parallel kinematic chains using FDM technologies. The printing temperature was 215 °C, table temperature – 60 °C. A fundamentally new scheme of an experimental plant for studying the bending of a three-layer plate is proposed. The aim of the research is to conduct tests of samples of a three-layer honeycomb panel for static bending when one edge of the sample is rigidly pinched. For the tests, a certified TiraTest 2300 universal testing machine (UTM), which allows to perform tensile and compression tests at a given traverse speed and measure the load with a relative error of 1%, was used. The UTM allows to load the sample and measure the load and displacement of the traverse. A sixteen-channel strain gauge station is used to measure the surface deformations of the housings. Transverse displacements of a three-layer plate were obtained as experimental data. The bending of the three-layer plate is modeled in the commercial package ANSYS. The results of experimental and numerical analysis coincide well.Keywords
This publication has 11 references indexed in Scilit:
- The stressed state of three-layer composites with tetrachiral honeycombs under bending conditions: Mathematical modeling and additive manufacturing laboratory experimentsComposite Structures, 2022
- Nonlinear vibrations of doubly curved composite sandwich shells with FDM additively manufactured flexible honeycomb coreActa Mechanica, 2022
- Analytical solution and experimental verification for the buckling failure of additively manufactured octagonal honeycombsComposite Structures, 2022
- Experimental and Numerical Study on Fatigue of Sandwich Plates with Honeycomb Core Manufactured by Fused Deposition ModellingApplied Composite Materials, 2022
- Nonlinear supersonic flutter of sandwich truncated conical shell with flexible honeycomb core manufactured by fused deposition modelingInternational Journal of Non-Linear Mechanics, 2022
- In-plane compression behavior of hybrid honeycomb metastructures: Theoretical and experimental studiesAerospace Science and Technology, 2020
- Lightweight cellular metal composites with zero and tunable thermal expansion enabled by ultrasonic additive manufacturing: Modeling, manufacturing, and testingComposite Structures, 2019
- Additive Metal Technologies for Aerospace Sustainment2018
- 3D printed hierarchical honeycombs with shape integrity under large compressive deformationsMaterials & Design, 2018
- Advances in Fused Deposition Modeling2017