Pre-Energization Concept for Overhead Lines in MTDC Grids Using DCCB Internal Capacitor
- 26 January 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 37 (1) , 155-164
Abstract
The integration of overhead lines in future MTDC grids leads to a higher fault rate compared to cables. Most of the faults are considered to be non-permanent, so that the line can be reconnected after dielectric recovery. The auto-reclosing procedure in HVDC systems reveals new challenges since multiple restrikes are possible within a short period of time. This paper proposes an auxiliary circuit for DC Circuit Breakers (DCCB) which enables to use the DCCB internal capacitor for the line pre-energization. A comprehensive description of the switchgear operations during the pre-energization sequence is provided and the fault property identification method is defined. The method is validated by simulations in a MTDC grid and a sensitivity analysis is carried out using EMTP-RV.Keywords
Funding Information
- SuperGrid Institute, an Institute for the Energy Transition
- Investissements d’Avenir (ANE-ITE-002-01)
This publication has 13 references indexed in Scilit:
- Fault property identification method and application for MTDC grids with hybrid DC circuit breakerInternational Journal of Electrical Power & Energy Systems, 2019
- Design and test of VSC assisted resonant current (VARC) DC circuit breaker2019
- Sequential auto-reclosing method for hybrid HVDC breaker in VSC HVDC links2017
- Fault arc extinction and system re-start on HVDC transmission lines using LCC or VSC full-bridge converters with integrated arc recovery simulation models2017
- HVDC circuit breakers for HVDC grid applications2015
- Germany jump-starts the supergridIEEE Spectrum, 2013
- Detailed and Averaged Models for a 401-Level MMC–HVDC SystemIEEE Transactions on Power Delivery, 2012
- HVDC Circuit Breakers: A Review Identifying Future Research NeedsIEEE Transactions on Power Delivery, 2011
- Using Modal Analysis to Estimate Received Signal Levels for a Power-Line Carrier Channel on a 500-kV Transmission LineIEEE Transactions on Power Delivery, 2009
- Locating and Isolating DC Faults in Multi-Terminal DC SystemsIEEE Transactions on Power Delivery, 2007