Optimization of TIG welding parameters for tensile load testing on dissimilar material joints of galvanized steel (SGCC) and low carbon steel (SPCC-SD)
Open Access
- 3 September 2024
- journal article
- Published by Politeknik Negeri Lhokseumawe in Jurnal POLIMESIN
- Vol. 22 (4) , 378-382
Abstract
Tungsten Inert Gas (TIG) welding uses a tungsten electrode and argon or helium gas for shielding. It offers excellent shielding, stable arc, adjustable heat input, minimal spattering, and attractive welds. Widely used in various industries, especially for thin materials like galvanized sheets, TIG welding can be challenging for dissimilar materials like galvanized steel and low-carbon steel due to their different melting points. Studying optimal welding parameters is crucial for success. This research focuses on TIG welding of SPCC-SD (JIS 3141) and SGCC (JIS 3302) materials with thicknesses of 0.6 mm and 0.8 mm. The electric current was varied at 45, 50, and 55 A, whereas the gas flow rate was varied at 12, 15, and 18 LPM. The weld bead diameter was varied as 5, 8, and 10 mm. Subsequently, the welded samples were subjected to tensile testing using a SHIMADZU AGS-X 10Kn STD E200V tensile testing machine. The data from the tensile tests were analysed using S/N ratio analysis and Analysis of Variance (ANOVA) with the assistance of the Minitab software. The results of the S/N ratio analysis indicated that the most optimal parameters were an electric current of 55 A, flow rate of 15 LPM, and weld bead diameter of 10 mm. Conversely, the ANOVA revealed that the weld bead diameter significantly influenced the tensile load in TIG welding of SPCC-SD (JIS 3141) with SGCC (JIS 3302) materials, accounting for up to 44.42% of the variation. Following the weld bead diameter, the flow rate and welding current contributed to 21.93% and 16.41%, respectively.Keywords
This publication has 21 references indexed in Scilit:
- Laser-TIG welding of galvanized steel – numerical and experimental assessment of the effect of arc in various setupsIOP Conference Series: Materials Science and Engineering, 2021
- A vision-based method for lap weld defects monitoring of galvanized steel sheets using convolutional neural networkJournal of Manufacturing Processes, 2021
- Optimization of process parameters in TIG welding of AISI 4140 stainless steel using Taguchi techniqueMaterials Today: Proceedings, 2021
- Evaluation of tensile shear strength for dissimilar spot welds of Al-Si-Mg aluminum alloy and galvanized steel by delta-spot welding processJournal of Mechanical Science and Technology, 2019
- Research advances in high-energy TIG arc weldingThe International Journal of Advanced Manufacturing Technology, 2019
- Shear strength of Cu/In–48Sn/Cu diffusion soldered interconnectionsScience and Technology of Welding and Joining, 2011
- Keyhole behaviour during laser welding of zinc-coated steelJournal of Physics D: Applied Physics, 2011
- Joining the car-body sheets using clinching process with various thickness and mechanical property arrangementsArchives of Civil and Mechanical Engineering, 2011
- Analysis of Variance: The Fundamental ConceptsJournal of Manual & Manipulative Therapy, 2009
- Optimisation of the GTA welding process using the Taguchi method and a neural networkScience and Technology of Welding and Joining, 2006