Enhancement of Wear and Corrosion Properties of OPTI N+ High-Nitrogen Stainless Steel via DC Magnetron Sputtered CrSiN and Ion Nitriding Duplex Treatments
Open Access
- 15 February 2026
- journal article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 66 (2) , 274-283
Abstract
This study investigates the enhancement of surface properties of OPTI N+ high-nitrogen stainless steel through a duplex treatment combining ion nitriding and CrSiN coating deposition via DC magnetron sputtering. Ion nitriding produced a hardened layer approximately 50 μm thick with a surface hardness of 1037.1 HV0.05, primarily composed of Fe₂N, Fe₃N and Fe₄N phases. CrSiN coatings deposited at various temperatures showed that the sample coated at 300°C exhibited the highest hardness (13.07 GPa), optimal H/E ratio (0.055), and superior tribological performance, including the lowest friction coefficient (0.5773), wear loss volume (7.67 × 10⁻⁴ mm³), and specific wear rate (3.23 × 10⁻⁷ mm³·m⁻¹·N⁻¹) under a 5 N load. Electrochemical tests confirmed enhanced corrosion resistance, with the lowest corrosion current density (1.38 × 10⁻⁶ A·cm⁻²) and highest polarization resistance (339.98 Ω·cm²). HRTEM analysis revealed a nanocomposite microstructure consisting of crystalline CrN and amorphous SiN. These results demonstrate that the CrSiN/ion nitriding duplex treatment significantly improves the mechanical, tribological, and corrosion resistance of high-nitrogen stainless steel.Keywords
This publication has 32 references indexed in Scilit:
- Microstructure and Mechanical Properties of Heat-Treated High-Nitrogen Martensitic Stainless SteelMetallography, Microstructure, and Analysis, 2024
- Influence of surface roughness of magnesite on bubble-particle energy barrier: Analysis based on a new simplified modelColloids and Surfaces A: Physicochemical and Engineering Aspects, 2023
- Recent developments in magnetron-sputtered silicon nitride coatings of improved mechanical and tribological properties for extreme situationsJournal of Materials Science, 2023
- Structural and mechanical properties of Si-doped CrN coatings deposited by magnetron sputtering techniqueHeliyon, 2023
- Electrochemical properties promotion of CrSiN coatings in seawater via Ni incorporationJournal of Alloys and Compounds, 2021
- Significance of Partial Substitution of Carbon by Nitrogen on Strengthening and Toughening Mechanisms of High Nitrogen Fe-15Cr-1Mo-C-N Martensitic Stainless SteelsMetallurgical and Materials Transactions A, 2019
- Influence of nitrogen on corrosion behaviour of high nitrogen martensitic stainless steels manufactured by pressurized metallurgyCorrosion Science, 2018
- Microstructural control of Cr–Si–N films by a hybrid arc ion plating and magnetron sputtering processActa Materialia, 2009
- Structure and mechanical properties of reactive sputtering CrSiN filmsApplied Surface Science, 2009
- Improvement of erosion and erosion–corrosion resistance of AISI420 stainless steel by low temperature plasma nitridingApplied Surface Science, 2008