Magnetic-Induced Swing Adsorption Using Fe 3 O 4 /SBA-15-PEI for Rapid and Energy-Efficient Direct Air Capture
- 21 November 2025
- journal article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (49) , 66542-66553
Abstract
Direct air capture (DAC) represents a critical negative emission technology for mitigating rising atmospheric CO2 levels. However, conventional DAC systems relying on temperature swing adsorption (TSA) often suffer from slow heating/cooling rates and high energy consumption. In this work, we developed Fe3O4/SBA-15-PEI, synthesized via co-precipitation and impregnation, and applied for the first time in magnetic-induced swing adsorption (MISA) under DAC conditions. The integration of Fe3O4 nanoparticles into the SBA-15 mesostructure endowed the adsorbent with magnetic responsiveness while improving its CO2 uptake from 1.21 to 1.53 mmol/g (30 °C, 500 ppm CO2/Ar). The CO2 adsorption capacity exhibited a strong dependence on both humidity and humidification strategy, reaching 2.05 mmol/g at RH = 30% when dry CO2 was introduced after prehumidification, and 3.2 mmol/g at RH = 90% when humid CO2 was directly introduced. Under the MISA process, Fe3O4/SBA-15-PEI achieved rapid heating/cooling rates of 12.5/22.7 °C/min under dry conditions and 5.0/11.6 °C/min under humid conditions, which were 328%/483% (dry) and 138%/218% (humid) faster than those under TSA, respectively. Fe3O4/SBA-15-PEI also demonstrated enhanced CO2 desorption performance, achieving desorption capacities of 1.25 mmol/g under dry and 3.24 mmol/g under humid conditions, with corresponding efficiencies of 92.6 and 99.9%, respectively. Additionally, diffusion modeling revealed a favorable time constant (D/r2) of 1.84 × 10-3 min-1. The adsorbent also maintained a CO2 uptake of ∼1.46 mmol/g over 10 cycles of humid DAC tests, indicating good kinetic and stability. Overall, these findings demonstrate the potential of MISA-regulated adsorbents for energy-efficient, rapid-cycle DAC systems and offer insights into the design of smart, responsive adsorbents.Keywords
Funding Information
- Division of Chemical, Bioengineering, Environmental and Transport Systems (CBET 2431601)
This publication has 47 references indexed in Scilit:
- Immobilization of H 2 O in Diffusion Channel of Metal–Organic Frameworks for Long‐Term CO 2 Capture from Humid Flue GasAdvanced Materials, 2025
- Precise Fixation of the Spatial Configuration of Adsorption Groups for Removal of Mercury Ions from the Acidic WastewaterAdvanced Functional Materials, 2025
- Polymer‐Sorbent Direct Air Capture Contactors with Complex Geometries 3D‐Printed via Templated Phase InversionAdvanced Functional Materials, 2024
- Magnetic nanoparticle‐induced sorbent regeneration for direct air captureAIChE Journal, 2024
- Induction vacuum swing adsorption over magnetic sorbent monoliths and extrudates for ethylene/ethane separationAIChE Journal, 2024
- Effective adsorptive removal of trace CO2 from olefin using alkanolamine‐polyethylenimine‐functionalized fumed silicaAIChE Journal, 2023
- Solvent Impregnated Polymers Loaded with Liquid‐Like Nanoparticle Organic Hybrid Materials for Enhanced Kinetics of Direct Air Capture and Point Source CO2 CaptureAdvanced Functional Materials, 2021
- Diffusion kinetics of CO2 in amine‐impregnated MIL‐101, alumina, and silica adsorbentsAIChE Journal, 2019
- Carbon Capture and Utilization UpdateEnergy Technology, 2017
- Magnetic Metal–Organic Frameworks for Efficient Carbon Dioxide Capture and Remote Trigger ReleaseAdvanced Materials, 2016