Fateme Rezaei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Fateme Rezaei has a total of 139 co-authors. Here are the top co-authors by number of shared publications:
- Ali Asghar Rownaghi
Department of Mechanical and Aerospace Engineering, University of Miami, 1251 Memorial Dr, Coral Gables, Florida 33146, United States
79 shared publications Shane Lawson
Donaldson Company, Inc., 1400 W 94th St., Minneapolis, Minnesota 55431, United States
32 shared publicationsAli A. Rownaghi
University of Miami
19 shared publicationsKyle Newport
Surface Measurements Systems
17 shared publicationsQasim Al-Naddaf
Department of Chemical & Biochemical Engineering, Missouri University of Science and Technology, Rolla, Missouri 65409-1230, United States
13 shared publications- Harshul Thakkar
Materials Synthesis and Integrated Devices (MPA-11), Material, Physics and Applications Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545, United States
12 shared publications
Latest Publications
- 1 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (36) , 49611-49623
Continuous-Flow Iodine Removal from Aqueous Wastes Using Structured MOF Composites
The effective immobilization and recovery of radioactive iodine under continuous-flow conditions remain critical challenges in nuclear waste management. Although metal-organic frameworks (MOFs) exhibit outstanding iodine capture performance, their application in practical flow-through systems is limited by the inherent challenges associated with powder handling, shaping, and the structural changes induced during fabrication into usable forms. In this work, the structural evolution of UiO-66-NH2 (U66-NH2) based structured adsorbents fabricated via extrusion, phase inversion, and surface coating was systematically elucidated, and revealed how distinct structural characteristics govern I2 adsorption performance. The extruded sample (U66-Clay) exhibited a densely packed particle structure, whereas the phase inversion-derived samples (U66-PVDF and U66-PES) formed interconnected macroporous networks with MOF particles partially embedded within a continuous polymer phase. In contrast, the surface-coated sample (U66-PVDF-C) maximized the exposure of MOF particles while maintaining structural stability, although its MOF loading was relatively low. Batch adsorption experiments revealed that iodine uptake was primarily governed by the loading and accessibility of UiO-66-NH2, with U66-Clay exhibiting an adsorption capacity (46.3 mg/g) comparable to that of pristine UiO-66-NH2 powder. Under continuous-flow conditions, U66-Clay exhibited the fastest adsorption kinetics and the highest Thomas rate constant (3.75 × 10–3 L/mg·min), owing to its greater exposure of active sites and more efficient mass transfer, significantly outperforming the polymer-based structured adsorbents (U66-PVDF, U66-PES). Spectroscopic analysis further revealed that iodine capture proceeded through a synergistic mechanism involving charge-transfer chemisorption at the electron-rich amino and aromatic sites, together with physical adsorption within the porous framework. Furthermore, all structured adsorbents exhibited rapid regeneration (∼30 min), minimal iodine leaching (∼6%), and excellent cyclic stability over repeated cycles. Overall, this work elucidates the structural evolution of MOFs during shaping process and establishes the relationship between structuring strategies and adsorption performance, providing general design principles for developing high-performance structured adsorbents for the continuous capture of iodine and other environmental pollutants.
- 1 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (36) , 49611-49623
Continuous-Flow Iodine Removal from Aqueous Wastes Using Structured MOF Composites
The effective immobilization and recovery of radioactive iodine under continuous-flow conditions remain critical challenges in nuclear waste management. Although metal-organic frameworks (MOFs) exhibit outstanding iodine capture performance, their application in practical flow-through systems is limited by the inherent challenges associated with powder handling, shaping, and the structural changes induced during fabrication into usable forms. In this work, the structural evolution of UiO-66-NH2 (U66-NH2) based structured adsorbents fabricated via extrusion, phase inversion, and surface coating was systematically elucidated, and revealed how distinct structural characteristics govern I2 adsorption performance. The extruded sample (U66-Clay) exhibited a densely packed particle structure, whereas the phase inversion-derived samples (U66-PVDF and U66-PES) formed interconnected macroporous networks with MOF particles partially embedded within a continuous polymer phase. In contrast, the surface-coated sample (U66-PVDF-C) maximized the exposure of MOF particles while maintaining structural stability, although its MOF loading was relatively low. Batch adsorption experiments revealed that iodine uptake was primarily governed by the loading and accessibility of UiO-66-NH2, with U66-Clay exhibiting an adsorption capacity (46.3 mg/g) comparable to that of pristine UiO-66-NH2 powder. Under continuous-flow conditions, U66-Clay exhibited the fastest adsorption kinetics and the highest Thomas rate constant (3.75 × 10–3 L/mg·min), owing to its greater exposure of active sites and more efficient mass transfer, significantly outperforming the polymer-based structured adsorbents (U66-PVDF, U66-PES). Spectroscopic analysis further revealed that iodine capture proceeded through a synergistic mechanism involving charge-transfer chemisorption at the electron-rich amino and aromatic sites, together with physical adsorption within the porous framework. Furthermore, all structured adsorbents exhibited rapid regeneration (∼30 min), minimal iodine leaching (∼6%), and excellent cyclic stability over repeated cycles. Overall, this work elucidates the structural evolution of MOFs during shaping process and establishes the relationship between structuring strategies and adsorption performance, providing general design principles for developing high-performance structured adsorbents for the continuous capture of iodine and other environmental pollutants.
- 11 June 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (24) , 12798-12810
Addressing Porosity-Packing Density Trade-offs in Carbon Aerogels via Binderless Densification for Hydrogen Storage
- 11 June 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (24) , 12798-12810
Addressing Porosity-Packing Density Trade-offs in Carbon Aerogels via Binderless Densification for Hydrogen Storage
- 4 May 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (19) , 10525-10534
Reversible Ambient-Temperature Hydrogen Storage through Kubas-Type Binding at Biomimetic Ni–Fe Sites on Hexagonal Boron Nitride
- 4 May 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (19) , 10525-10534
Reversible Ambient-Temperature Hydrogen Storage through Kubas-Type Binding at Biomimetic Ni–Fe Sites on Hexagonal Boron Nitride
- Open Access
- 27 April 2026
- Published by Wiley in AIChE Journal
- Vol. 72 (8)
Magnetic field‐assisted concentration swing adsorption for CO 2 capture over Fe 3 O 4 /fibrous nanosilica‐PEI adsorbent
Magnetic field‐assisted concentration swing adsorption (CSA) provides an electrification‐compatible alternative to conventional temperature swing adsorption (TSA) by enabling rapid heating/cooling and energy‐efficient regeneration under near‐isothermal conditions, thereby eliminating the need for sensible heat input. Here, Fe 3 O 4 nanoparticles were integrated with fibrous nanosilica (FNS) and polyethylenimine (PEI) to construct a magnetically responsive adsorbent for near‐isothermal CSA of CO 2 . Benefiting from the radially fibrous pore structure of FNS, Fe 3 O 4 /FNS‐PEI70 exhibited fast adsorption kinetics (2 adsorption capacity (4.2 mmol/g) at 80°C. Magnetic induction enabled efficient adsorbent regeneration and acheived 92.6% CO 2 desorption at the same temperature. Humidity significantly enhanced CO 2 capture (10.6 mmol/g at RH = 80%) without affecting the CSA process, whereas SO 2 caused irreversible deactivation and NO showed negligible adsorption. Under concentration swing conditions studied, a theoretical regeneration energy of 2.0 MJ/ kg CO2 was estimated for magnetic field‐assisted CSA process, which was significantly lower than that of TSA, highlighting its promise as an energy‐efficient and scalable pathway for electrified CO 2 capture.
- 27 April 2026
- Published by Wiley in AIChE Journal
- Vol. 72 (8)
Open AccessMagnetic field‐assisted concentration swing adsorption for CO 2 capture over Fe 3 O 4 /fibrous nanosilica‐PEI adsorbent
Magnetic field‐assisted concentration swing adsorption (CSA) provides an electrification‐compatible alternative to conventional temperature swing adsorption (TSA) by enabling rapid heating/cooling and energy‐efficient regeneration under near‐isothermal conditions, thereby eliminating the need for sensible heat input. Here, Fe 3 O 4 nanoparticles were integrated with fibrous nanosilica (FNS) and polyethylenimine (PEI) to construct a magnetically responsive adsorbent for near‐isothermal CSA of CO 2 . Benefiting from the radially fibrous pore structure of FNS, Fe 3 O 4 /FNS‐PEI70 exhibited fast adsorption kinetics (2 adsorption capacity (4.2 mmol/g) at 80°C. Magnetic induction enabled efficient adsorbent regeneration and acheived 92.6% CO 2 desorption at the same temperature. Humidity significantly enhanced CO 2 capture (10.6 mmol/g at RH = 80%) without affecting the CSA process, whereas SO 2 caused irreversible deactivation and NO showed negligible adsorption. Under concentration swing conditions studied, a theoretical regeneration energy of 2.0 MJ/ kg CO2 was estimated for magnetic field‐assisted CSA process, which was significantly lower than that of TSA, highlighting its promise as an energy‐efficient and scalable pathway for electrified CO 2 capture.
- 6 March 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (10) , 7039-7047
Determination of Binary CO 2 /CH 4 Adsorption Isotherms and Kinetics over Hierarchical Activated Carbons via the Zero-Length Column Technique
Current adsorption processes generally rely on unary adsorption isotherms to assess the efficacy of adsorbent materials suitable for a particular separation. While unary adsorption isotherms provide important information about the adsorbent’s affinities toward adsorbates of interest, they fail to accurately determine the real response of adsorbents in multicomponent systems. This is mainly due to cooperative and competitive adsorption phenomena that often take place in complex environments. As such, it is essential to obtain binary/multicomponent equilibrium data to have a realistic assessment of adsorption materials. In this work, we utilized the zero-length column (ZLC) technique to obtain binary adsorption isotherms of CO2 and CH4 over two hierarchical microporous-mesoporous carbons, namely, Br-318 and Nuchar. The ZLC generated low-pressure equilibrium isotherms of pure CO2 and CH4 closely resembled the volumetric isotherms, and the trend revealed by the experimental data of binary adsorption isotherms was qualitatively consistent with that obtained from the theoretical model, confirming the alignment between the two equilibrium data acquisition methods, as well as the theoretical and experimental approaches. The kinetic analysis of the ZLC profiles in the binary mixture indicated 55 and 66% reductions in diffusion of CO2 through Br-318 and Nuchar, respectively, in the presence of CH4 relative to the pure system. The findings of this investigation highlight the efficacy of the ZLC method in accurately determining the binary adsorption data.
- 6 March 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (10) , 7039-7047
Determination of Binary CO 2 /CH 4 Adsorption Isotherms and Kinetics over Hierarchical Activated Carbons via the Zero-Length Column Technique
Current adsorption processes generally rely on unary adsorption isotherms to assess the efficacy of adsorbent materials suitable for a particular separation. While unary adsorption isotherms provide important information about the adsorbent’s affinities toward adsorbates of interest, they fail to accurately determine the real response of adsorbents in multicomponent systems. This is mainly due to cooperative and competitive adsorption phenomena that often take place in complex environments. As such, it is essential to obtain binary/multicomponent equilibrium data to have a realistic assessment of adsorption materials. In this work, we utilized the zero-length column (ZLC) technique to obtain binary adsorption isotherms of CO2 and CH4 over two hierarchical microporous-mesoporous carbons, namely, Br-318 and Nuchar. The ZLC generated low-pressure equilibrium isotherms of pure CO2 and CH4 closely resembled the volumetric isotherms, and the trend revealed by the experimental data of binary adsorption isotherms was qualitatively consistent with that obtained from the theoretical model, confirming the alignment between the two equilibrium data acquisition methods, as well as the theoretical and experimental approaches. The kinetic analysis of the ZLC profiles in the binary mixture indicated 55 and 66% reductions in diffusion of CO2 through Br-318 and Nuchar, respectively, in the presence of CH4 relative to the pure system. The findings of this investigation highlight the efficacy of the ZLC method in accurately determining the binary adsorption data.
- 21 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (49) , 66542-66553
Magnetic-Induced Swing Adsorption Using Fe 3 O 4 /SBA-15-PEI for Rapid and Energy-Efficient Direct Air Capture
Direct air capture (DAC) represents a critical negative emission technology for mitigating rising atmospheric CO2 levels. However, conventional DAC systems relying on temperature swing adsorption (TSA) often suffer from slow heating/cooling rates and high energy consumption. In this work, we developed Fe3O4/SBA-15-PEI, synthesized via co-precipitation and impregnation, and applied for the first time in magnetic-induced swing adsorption (MISA) under DAC conditions. The integration of Fe3O4 nanoparticles into the SBA-15 mesostructure endowed the adsorbent with magnetic responsiveness while improving its CO2 uptake from 1.21 to 1.53 mmol/g (30 °C, 500 ppm CO2/Ar). The CO2 adsorption capacity exhibited a strong dependence on both humidity and humidification strategy, reaching 2.05 mmol/g at RH = 30% when dry CO2 was introduced after prehumidification, and 3.2 mmol/g at RH = 90% when humid CO2 was directly introduced. Under the MISA process, Fe3O4/SBA-15-PEI achieved rapid heating/cooling rates of 12.5/22.7 °C/min under dry conditions and 5.0/11.6 °C/min under humid conditions, which were 328%/483% (dry) and 138%/218% (humid) faster than those under TSA, respectively. Fe3O4/SBA-15-PEI also demonstrated enhanced CO2 desorption performance, achieving desorption capacities of 1.25 mmol/g under dry and 3.24 mmol/g under humid conditions, with corresponding efficiencies of 92.6 and 99.9%, respectively. Additionally, diffusion modeling revealed a favorable time constant (D/r2) of 1.84 × 10-3 min-1. The adsorbent also maintained a CO2 uptake of ∼1.46 mmol/g over 10 cycles of humid DAC tests, indicating good kinetic and stability. Overall, these findings demonstrate the potential of MISA-regulated adsorbents for energy-efficient, rapid-cycle DAC systems and offer insights into the design of smart, responsive adsorbents.
- 21 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (49) , 66542-66553
Magnetic-Induced Swing Adsorption Using Fe 3 O 4 /SBA-15-PEI for Rapid and Energy-Efficient Direct Air Capture
Direct air capture (DAC) represents a critical negative emission technology for mitigating rising atmospheric CO2 levels. However, conventional DAC systems relying on temperature swing adsorption (TSA) often suffer from slow heating/cooling rates and high energy consumption. In this work, we developed Fe3O4/SBA-15-PEI, synthesized via co-precipitation and impregnation, and applied for the first time in magnetic-induced swing adsorption (MISA) under DAC conditions. The integration of Fe3O4 nanoparticles into the SBA-15 mesostructure endowed the adsorbent with magnetic responsiveness while improving its CO2 uptake from 1.21 to 1.53 mmol/g (30 °C, 500 ppm CO2/Ar). The CO2 adsorption capacity exhibited a strong dependence on both humidity and humidification strategy, reaching 2.05 mmol/g at RH = 30% when dry CO2 was introduced after prehumidification, and 3.2 mmol/g at RH = 90% when humid CO2 was directly introduced. Under the MISA process, Fe3O4/SBA-15-PEI achieved rapid heating/cooling rates of 12.5/22.7 °C/min under dry conditions and 5.0/11.6 °C/min under humid conditions, which were 328%/483% (dry) and 138%/218% (humid) faster than those under TSA, respectively. Fe3O4/SBA-15-PEI also demonstrated enhanced CO2 desorption performance, achieving desorption capacities of 1.25 mmol/g under dry and 3.24 mmol/g under humid conditions, with corresponding efficiencies of 92.6 and 99.9%, respectively. Additionally, diffusion modeling revealed a favorable time constant (D/r2) of 1.84 × 10-3 min-1. The adsorbent also maintained a CO2 uptake of ∼1.46 mmol/g over 10 cycles of humid DAC tests, indicating good kinetic and stability. Overall, these findings demonstrate the potential of MISA-regulated adsorbents for energy-efficient, rapid-cycle DAC systems and offer insights into the design of smart, responsive adsorbents.
- 16 October 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (43) , 20506-20515
Functionalized MOF-Coated Ce(OH) 4 @PIM-1 Composites for Enhanced Detoxification of Dimethyl 4-Nitrophenyl Phosphate
- 16 October 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (43) , 20506-20515
Functionalized MOF-Coated Ce(OH) 4 @PIM-1 Composites for Enhanced Detoxification of Dimethyl 4-Nitrophenyl Phosphate
- 8 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (43) , 59345-59355
3D-Printed Metal–Organic Framework/Polymer Catalytic Filters for Detoxification of Nerve Agent Simulants
The growing threat of chemical warfare agents (CWAs) highlights the urgent need for advanced personal protective equipment to protect military personnel, first responders, and civilians from inhalation exposure. Conventional breathable mask filters primarily rely on adsorption to trap CWAs, which can lead to secondary contamination due to desorption. Therefore, there is a critical need for filter materials that not only allow airflow but also actively detoxify CWAs. In this study, we developed 3D-printed catalytic filters using a composite of Ultem and polymer of intrinsic microporosity (PIM-1) in a 40/60% v/v ratio, integrated with 30 wt% Ce(OH)4. This base material (PU@Ce(OH)4) was further functionalized with MOF-808-NH2 to enhance the catalytic activity. Two incorporation strategies were employed: (1) paste incorporation (MOF-I_PU@Ce(OH)4), where 6.2 wt% MOF-808-NH2 was mixed directly into the printing paste prior to fabrication; and (2) post-print coating (MOF-C_PU@Ce(OH)4), where the printed PU@Ce(OH)4 structure was coated with MOF-808-NH2 via a supramolecular assembly method. The filters (PU@Ce(OH)4, MOF-I_PU@Ce(OH)4, and MOF-C_PU@Ce(OH)4) were evaluated for permeability and catalytic degradation of the nerve agent simulant dimethyl 4-nitrophenyl phosphate (DMNP). Among them, MOF-C_PU@Ce(OH)4 exhibited the best balance of breathability and catalytic efficiency, attributed to the increased accessible surface area provided by the coating method. MOF-C_PU@Ce(OH)4 achieved complete DMNP hydrolysis within 20 min, with a half-life (τ1/2) of 6.08 min. In comparison, the paste-incorporated filter (MOF-I_PU@Ce(OH)4) required 30 min for complete degradation, with a τ1/2 of 14.8 min. These findings demonstrate the superiority of MOF coating in development of breathable filters that combine adsorption and catalytic functionalities for capture and in-situ destruction of CWAs and their simulants.
- 8 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (43) , 59345-59355
3D-Printed Metal–Organic Framework/Polymer Catalytic Filters for Detoxification of Nerve Agent Simulants
The growing threat of chemical warfare agents (CWAs) highlights the urgent need for advanced personal protective equipment to protect military personnel, first responders, and civilians from inhalation exposure. Conventional breathable mask filters primarily rely on adsorption to trap CWAs, which can lead to secondary contamination due to desorption. Therefore, there is a critical need for filter materials that not only allow airflow but also actively detoxify CWAs. In this study, we developed 3D-printed catalytic filters using a composite of Ultem and polymer of intrinsic microporosity (PIM-1) in a 40/60% v/v ratio, integrated with 30 wt% Ce(OH)4. This base material (PU@Ce(OH)4) was further functionalized with MOF-808-NH2 to enhance the catalytic activity. Two incorporation strategies were employed: (1) paste incorporation (MOF-I_PU@Ce(OH)4), where 6.2 wt% MOF-808-NH2 was mixed directly into the printing paste prior to fabrication; and (2) post-print coating (MOF-C_PU@Ce(OH)4), where the printed PU@Ce(OH)4 structure was coated with MOF-808-NH2 via a supramolecular assembly method. The filters (PU@Ce(OH)4, MOF-I_PU@Ce(OH)4, and MOF-C_PU@Ce(OH)4) were evaluated for permeability and catalytic degradation of the nerve agent simulant dimethyl 4-nitrophenyl phosphate (DMNP). Among them, MOF-C_PU@Ce(OH)4 exhibited the best balance of breathability and catalytic efficiency, attributed to the increased accessible surface area provided by the coating method. MOF-C_PU@Ce(OH)4 achieved complete DMNP hydrolysis within 20 min, with a half-life (τ1/2) of 6.08 min. In comparison, the paste-incorporated filter (MOF-I_PU@Ce(OH)4) required 30 min for complete degradation, with a τ1/2 of 14.8 min. These findings demonstrate the superiority of MOF coating in development of breathable filters that combine adsorption and catalytic functionalities for capture and in-situ destruction of CWAs and their simulants.