Probabilistic effect of non-potable mixing water on characteristic strength of concrete
Author:
- 1 July 2024
- journal article
- research article
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 76 (13) , 707-722
Abstract
Across the world, the acceptance criterion for concrete made with non-potable water (SA) is stipulated for mean strength with reference to similar concrete made with potable water (SP). The basis for the strength design of concrete is the characteristic strength. The effect of the acceptance criteria on the characteristic strength of SA and SP was examined using statistical simulations, for the first time. It was found that, compared with a two-sample set, using a three-sample set would improve the characteristic strength of SA. A higher allowable ratio between the means of SA and SP and a lower deviation of individual samples from the mean would improve the characteristic strength of SA. The effect of the coefficient of variation (CoV) of the original population on the characteristic strength of SA varied. On the one hand, a higher CoV reduced the characteristic strength of SP, thereby increasing the probability of SA strength being higher than SP strength. On the other, a higher CoV of SP meant a wider spread of the samples and that could increase the CoV of SA, thereby reducing the characteristic strength of SA. Probabilistic charts were developed for the characteristic strengths of SA and SP for different combinations of the aforementioned variables, with guidance for practical application.Keywords
This publication has 30 references indexed in Scilit:
- The Durability of Concrete Made Up of Sugar Cane Bagasse Ash (SCBA) as a Partial Replacement of Cement: A ReviewArabian Journal for Science and Engineering, 2023
- Pathways towards sustainable concreteCement and Concrete Research, 2022
- Toward the development of sustainable concrete with Crumb Rubber: Design-oriented Models, Life-Cycle-Assessment and a site applicationConstruction and Building Materials, 2022
- Fresh and hardened properties of five non-potable water mixed and cured concrete: A comprehensive reviewConstruction and Building Materials, 2021
- Production of Green Synthetic Lightweight Aggregate and its Utilisation in Green ConcreteArabian Journal for Science and Engineering, 2021
- Mechanical and Abrasion Resistance Properties of Concrete Containing Recycled Abrasive Waste as Partial Replacement of Fine AggregateArabian Journal for Science and Engineering, 2021
- Effects of Waste Ceramic as Cement and Fine Aggregate on Durability Performance of Sustainable MortarArabian Journal for Science and Engineering, 2019
- Sustainable production of concrete containing discarded beverage glass as fine aggregateConstruction and Building Materials, 2018
- Impact of use of steel slag as coarse aggregate and wastewater on fresh and hardened properties of concreteConstruction and Building Materials, 2018
- Nondestructive evaluation of concrete strength: An historical review and a new perspective by combining NDT methodsConstruction and Building Materials, 2012