Study of electromigration-induced Cu consumption in the flip-chip Sn∕Cu solder bumps
Authors:
- 15 October 2006
- journal article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 100 (8) , 083702
Abstract
The Cu consumption in flip-chip Sn∕Cu solder joint structures, both with and without current stressing was studied. The Cu consumption activation energy without current stressing was determined to be 0.93eV. With current stressing, the Cu consumption activation energy decreased to 0.66eV. We believe that the enhancement of Cu consumption by current stressing is due to the electromigration (EM) Cu atoms dissolved in the Sn to electromigrate instantaneously toward the anode side, which means that the cathode’s Cu–Sn compound layer dissolves into the Sn to satisfy the Cu solubility limit. The EM-induced Cu consumption is controlled by either the dissolution of the cathode Cu–Sn compound or by EM Cu flux in Sn. The temperature defines that the controlling step of Cu consumption was found and determined to be 129°C by equating the dissolution flux in the Cu–Sn compound and the EM Cu flux in Sn. When the EM temperature is higher than the critical temperature, the Cu–Sn compound dissolution process controls the Cu consumption. In this case, a constant interfacial Cu–Sn compound thickness remains at the cathode interface, which is determined by the balance between the Cu–Sn compound dissolution and the chemical Cu flux. If the EM temperature is lower than the critical temperature, the EM Cu flux in the Sn controls the Cu consumption. The growth of Cu–Sn compound at cathode is controlled by the EM Cu flux in Sn and the chemical Cu flux.Keywords
This publication has 14 references indexed in Scilit:
- Effects of solder alloy constitutive relationships on impact force responses of package-level solder joints under ball impact testJournal of Electronic Materials, 2006
- Study of wetting reaction between eutectic AuSn and Au foilJournal of Electronic Materials, 2006
- Electromigration-induced failure in flip-chip solder jointsJournal of Electronic Materials, 2005
- The solid solubility of Ag and Cu in the Sn phase of eutectic and near-eutectic Sn-Ag-Cu solder alloysJournal of Electronic Materials, 2004
- Electromigration failure in flip chip solder joints due to rapid dissolution of copperJournal of Materials Research, 2003
- Scallop formation and dissolution of Cu–Sn intermetallic compound during solder reflowJournal of Applied Physics, 2002
- Current-crowding-induced electromigration failure in flip chip solder jointsApplied Physics Letters, 2002
- Microstructure-electromigration correlation in a thin stripe of eutectic SnPb solder stressed between Cu electrodesApplied Physics Letters, 1999
- Kinetic analysis of the soldering reaction between eutectic SnPb alloy and Cu accompanied by ripeningPhysical Review B, 1996
- Analysis of low-temperature intermetallic growth in copper-tin diffusion couplesMetallurgical Transactions A, 1992