Experimental and Theoretical Characterization on the Temperature Dependent Tensile Strength of FRP Composites Considering Interfacial Properties and Fiber Agglomeration
Authors:
- 9 February 2026
- journal article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (17)
Abstract
Fiber reinforced polymer (FRP) composites have emerged as critical materials in the aerospace field. In the application, the characterization of the mechanical properties of composites with different fiber contents at different temperatures has long constituted a significant research area. This study conducted a combined experimental and theoretical approach to investigate the effects of fiber content and temperature on the mechanical properties of FRP composites. Firstly, this study examined the mechanical responses of tensile specimens of composites; it was found that the degree of nonlinearity in mechanical behavior increases with higher fiber content, while both tensile strength and failure strain initially rise and then decline as fiber content. Furthermore, the tensile tests at varying temperatures revealed a significant decrease in tensile strength with increasing temperature. Finally, based on the Force‐Heat Equivalence Energy Density Principle (FHEEDP), this work established a temperature dependent tensile strength (TDTS) model for FRP composites. It considers the influences of temperature, fiber/matrix properties, and residual thermal stresses, particularly the interfacial performance and fiber agglomeration. The model employs a physically‐based theoretical method, enabling prediction of the TDTS of FRP composites. This study provides the theoretical basis for predicting their strength performance and reliability evaluation of FRP composites under service conditions.Keywords
Funding Information
- National Natural Science Foundation of China (12572238;12202086)
- Natural Science Foundation of Chongqing Municipality (CSTB2025NSCQ‐GPX0853)
This publication has 42 references indexed in Scilit:
- Effect of temperature and atmosphere on the fracture toughness and failure mechanisms of two-dimensional plain-woven SiCf/SiC composites: Experiments and modelingActa Mechanica Sinica, 2025
- Thermal and mechanical performance of unidirectional composites from bamboo fibers with varying volume fractionsPolymer Composites, 2019
- Effect of fiber volume fraction on the thermal and mechanical behavior of polylactide‐based composites incorporating bamboo fibersJournal of Applied Polymer Science, 2017
- Effects of glass fibers on mechanical and thermal properties of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate)Polymer Composites, 2016
- Theoretical analysis of interfacial debonding and fiber pull-out in fiber-reinforced polymer-matrix compositesArchive of Applied Mechanics, 2015
- Effect of fibre concentration, temperature and mould thickness on weldline integrity of short glass-fibre-reinforced polypropylene copolymer compositesJournal of Materials Science, 2009
- Physical Properties of Polymers Handbook2007
- Temperature dependence of work of fracture parameters in polybutylene terephthalate (PBT)Polymer Engineering & Science, 2000
- Fiber orientation and mechanical properties of short‐fiber‐reinforced injection‐molded composites: Simulated and experimental resultsPolymer Composites, 1993
- Temperature dependence of critical fiber length for glass fiber‐reinforced thermosetting resinsJournal of Applied Polymer Science, 1978