Electrical Properties of Horizontal Array Capacitor Using Composite Organic Dielectric Layer of Impregnated Glass-Fiber Epoxy
Open Access
- 27 April 2020
- journal article
- research article
- Published by Wiley in Advances in Polymer Technology
- Vol. 2020, 1-8
Abstract
We introduce a horizontal array capacitor with nine capacitances in a single body using an organic dielectric layer impregnated with glass fiber as a prepreg sheet. An organic solid horizontal array capacitor with a dielectric of prepreg materials of the epoxy type can implement the nine capacitances in a single body via a unique simple lamination and cutting process. We then investigate the basic electrical properties of a horizontal array capacitor. The organic solid array capacitors with five electrodes and four dielectrics are Cu/PPG layer/Cu/PPG layer/Cu/PPG layer/Cu/PPG layer/Cu with a horizontal array structure. The size of a completed array capacitor is 2.85 × 2.85 mm. The height of the fabricated array capacitor in the vertical direction is 0.5 mm, with nine capacitances possessing a series-type structure. The average capacitance value of C1, C2, C3, and C4 is 1.98 nF, and each tolerance has a value within 1% based on the average value. The temperature change rate in the capacitance maintains a nearly linear characteristic, but the rate of change tends to increase finely from 120°C or more. The capacitance values of C5, C6, and C7 with the parallel circuit were measured according to the voltage. Impedance and ESR (equivalent series resistor) of C1 were measured according to frequency and temperature.Keywords
Funding Information
- Ministry of Education of the People's Republic of China (2016R1A6A3A11931569, 2017-B02)
- Ministry of Education of the People's Republic of China (2016R1A6A3A11931569, 2017-B02)
- Material & Process Platform for Convergence Sensors (2016R1A6A3A11931569, 2017-B02)
This publication has 11 references indexed in Scilit:
- The Effects of (Ba 0.4 Ca 0.6 )SiO 3 Nano Spheroidization Glass Additives on the Microstructure and Microwave Dielectric Properties of Ba(Zn 1/3 Ta 2/3 )O 3 CeramicsJournal of Electrical Engineering & Technology, 2014
- Preparation and characterization of glass fiber-coir hybrid composites by a novel and facile Prepreg/Press processFibers and Polymers, 2014
- Design and Analysis of Electrical Properties of a Multilayer Ceramic Capacitor Module for DC-Link of Hybrid Electric VehiclesJournal of Electrical Engineering & Technology, 2013
- Design and performance of multifunctional structural composite capacitorsJournal of Composite Materials, 2011
- Dielectric Properties of Polymer-ceramic Composites for Embedded CapacitorsTransactions on Electrical and Electronic Materials, 2009
- Development of lamination process for chip-in-substrates2007
- High‐Dielectric‐Constant Silver–Epoxy Composites as Embedded DielectricsAdvanced Materials, 2005
- Progress in the Synthesis of Nanocrystalline BaTiO 3 Powders for MLCCInternational Journal of Applied Ceramic Technology, 2005
- The grain size effect on dielectric properties of BaTiO3 based ceramicsMaterials Science and Engineering: B, 2003
- How advanced low coefficient of thermal expansion (CTE) laminates and prepregs can improve the reliability of printed circuit boards (PCBs)Circuit World, 2003