Comparison of Stresses in Monoblock Tilted Implants and Conventional Angled Multiunit Abutment-implant Connection Systems in the All-on-four Procedure
Preprint
- 19 October 2020
- preprint
- Published by Springer Nature in Research Square
Abstract
Background: The All-on-four dental implant method is an implantology method designed to provide a comfortable prosthetic treatment option by avoiding advanced surgical procedures. This research aims to compare and evaluate the stress and tension values in conventional angled multiunit abutment-implant connection systems and monoblock dental implants used in the all-on-four procedure with finite element analysis.Methods: Two master models were created by placing four implants connected to multiunit abutments (group A) in the interforaminal region of a completely edentulous mandible and four monoblock implants (group B) in the same region of another completely edentulous mandible. Group A implants were classified according to their diameter as follows: 3.5 mm (M1A), 4.0 mm (M2A), and 4.5 mm (M3A). Similarly, group B implants were classified as M1B, M2B, and M3B. In the six models rehabilitated with acrylic fixed prostheses, a 100 N force was applied to the anterior implant region, and a 250 N force was applied to the posterior cantilever in both axial and 30° oblique directions. Von Mises stresses were analyzed in the bone and implant regions of all models.Results: M1A and M1B, M2A and M2B, and M3A and M3B were compared with each other under axial and oblique forces. The maximum Von Mises stresses in the bone around implants and the prosthesis screws, and the maximum and minimum principal stresses in the cortical and trabecular bone in group A models were significantly higher than those in group B models.Conclusions: This study shows that the use of monoblock implants without abutment-implant connections can prevent bacterial accumulation in micro-gaps, but the biomechanical properties of this implant system should be improved.Keywords
All Related Versions
- Version 1, 2020-10-19, Research Square
- Published version: BMC Oral Health, 21 (1), 1.
This publication has 16 references indexed in Scilit:
- Mechanism of and factors associated with the loosening of the implant abutment screw: A reviewJournal of Esthetic and Restorative Dentistry, 2019
- Implant-Abutment Connections: A Review of Biologic Consequences and Peri-implantitis ImplicationsThe International Journal of Oral and Maxillofacial Implants, 2017
- Microbial colonization at the implant-abutment interface and its possible influence on periimplantitis: A systematic review and meta-analysisJournal of Prosthodontic Research, 2017
- Comparison between all-on-four and all-on-six treatment concepts and framework material on stress distribution in atrophic maxilla: A prototyping guided 3D-FEA studyMaterials Science and Engineering: C, 2016
- The Comparison of Stress Distribution with Different Implant Numbers and Inclination Angles In All-on-four and Conventional Methods in Maxilla: A Finite Element AnalysisJournal of Dental Research, Dental Clinics, Dental Prospects, 2015
- Load transfer in tilted implants with varying cantilever lengths in an all‐on‐four situationAustralian Dental Journal, 2012
- Evaluation of the structural behavior of three and four implant-supported fixed prosthetic restorations by finite element analysisJournal of Prosthodontic Research, 2012
- Influence of implant abutment angulations on the fracture resistance of overlaying CAM‐milled zirconia single crownsAustralian Dental Journal, 2011
- Methods to Treat the Edentulous Posterior Maxilla: Implants With Sinus GraftingJournal of Oral and Maxillofacial Surgery, 2009
- Single implant-supported molar and premolar crowns: a ten-year retrospective clinical reportThe Journal of Prosthetic Dentistry, 2003