Effect of Infiltration Ce0.8Sm0.2O1.9 Against Double Perovskite Performance LaBa0.5Sr0.5Co2O5+δ as IT-SOFC Cathode
Open Access
- 13 December 2022
- journal article
- research article
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in Jurnal Kimia Sains dan Aplikasi
- Vol. 25 (10) , 346-351
Abstract
Modifying the sample surface by infiltration technique using Ce0.8Sm0.2O1.9 (SDC) electrolyte has been done to increase the catalytic activity of the LaBa0.5Sr0.5Co2O5+δ (LBSC) cathode. The cathode powder structure was evaluated using X-ray diffraction (XRD) at room temperature, and the LBSC cathode microstructure was analyzed using scanning electron microscopy (SEM). The electrical conductivity of the LBSC cathode was tested using the four-probe DC method. Symmetrical cells were tested using a potentiostat Voltalab PGZ 301 and a digital source meter Keithley 2420. LBSC powder was discovered to have a tetragonal structure (space group: P4/mmm) with lattice parameters of a = 3.86253 Å, c = 7.73438 Å, and V = 115.338 Å. From the SEM image, the LBSC cathode has homogeneous, dense, and highly porous grains. The electrical conductivity showed metallic behavior, gradually decreasing from 167 S.cm-1 at 300℃ to 105 S.cm-1 at 800℃. A significant increase in current density (io) of 275% occurred at 800℃ from 154.10 mA.cm−2 (pure LBSC) to 577.86 mA.cm−2 (LBSC+0.5M SDC). The activation energy value (Ea) of symmetrical cells was determined using electrochemical impedance spectroscopy (EIS), low-field (LF), and high-field (HF) techniques. The activation energy of the LBSC+0.5 M SDC specimen was 47.9 kJ mol-1 or 79.4% lower than the activation energy of the LBSC cathode specimen without infiltration at atmospheric pressure of 0.03 atm. These results indicate that SDC infiltration of the LBSC cathode can reduce the activation energy of the significant. The cathode membrane adheres quite well to the electrolyte membrane, the cathode porosity varies in the range of 1–4 µm, and the grain size is 0.1–1.5 µm.Keywords
This publication has 31 references indexed in Scilit:
- Enhanced performance of LSCF cathode through surface modificationInternational Journal of Hydrogen Energy, 2012
- Characterization of Ba-deficient PrBa1−xCo2O5+δ as cathode material for intermediate temperature solid oxide fuel cellsJournal of Power Sources, 2012
- Nanoscale and nano-structured electrodes of solid oxide fuel cells by infiltration: Advances and challengesInternational Journal of Hydrogen Energy, 2012
- A new symmetric solid oxide fuel cell with a samaria-doped ceria framework and a silver-infiltrated electrocatalystJournal of Power Sources, 2012
- Oxygen ion diffusion in cation ordered/disordered GdBaCo2O5+δJournal of Materials Chemistry, 2010
- La0.6Sr0.4Co0.2Fe0.8O3−δ cathodes infiltrated with samarium-doped cerium oxide for solid oxide fuel cellsJournal of Power Sources, 2010
- Preparation and Characterization of Samaria‐Doped Ceria Electrolyte Materials for Solid Oxide Fuel CellsJournal of the American Ceramic Society, 2007
- A comprehensive micro-scale model for transport and reaction in intermediate temperature solid oxide fuel cellsElectrochimica Acta, 2006
- Bismuth-Ruthenate-Based Cathodes for IT-SOFCsJournal of the Electrochemical Society, 2005
- Factors Governing Oxygen Reduction in Solid Oxide Fuel Cell CathodesChemical Reviews, 2004