Effect of compatibilizer in acrylonitrile‐butadiene‐styrene toughened nylon 6 blends: Ductile–brittle transition temperature
Authors:
- E. M. AraújoEAE. M. Araújo
- E. HageEHE. Hage
- A. J. F. CarvalhoACA. J. F. Carvalho
- 26 September 2003
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 90 (10) , 2643-2647
Abstract
The ductile–brittle transition temperatures were determined for compatibilized nylon 6/acrylonitrile‐butadiene‐styrene (PA6/ABS) copolymer blends. The compatibilizers used for those blends were methyl methacrylate‐co‐maleic anhydride (MMA‐MAH) and MMA‐co‐glycidyl methacrylate (MMA‐GMA). The ductile–brittle transition temperatures were found to be lower for blends compatibilized through maleate modified acrylic polymers. At room temperature, the PA6/ABS binary blend was essentially brittle whereas the ternary blends with MMA‐MAH compatibilizer were supertough and showed a ductile–brittle transition temperature at −10°C. The blends compatibilized with maleated copolymer exhibited impact strengths of up to 800 J/m. However, the blends compatibilized with MMA‐GMA showed poor toughness at room temperature and failed in a brittle manner at subambient temperatures. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2643–2647, 2003Keywords
Funding Information
- PICDT/CAPES (Brazilian Research Council)
- Fundação de Amparo à Pesquisa do Estado de São Paulo
- PRONEX
This publication has 18 references indexed in Scilit:
- Thermal, mechanical, and diffusional properties of nylon 6/ABS polymer blends: Compatibilizer effectPolymer Engineering & Science, 2000
- Compatibilization of nylon 6/ABS blendsusing glycidyl methacrylate/methyl methacrylate copolymersPolymer, 1998
- Impact modification of poly(butylene terephthalate) by ABS materialsPolymer, 1997
- The role of matrix molecular weight in rubber toughened nylon 6 blends: 3. Ductile-brittle transition temperaturePolymer, 1996
- Deformation mechanisms in nylon 6/ABS blendsJournal of Polymer Science Part B: Polymer Physics, 1994
- Morphology of nylon 6/ABS blends compatibilized by a styrene/maleic anhydride copolymerPolymer, 1994
- Effect of the nature of the polyamide on the properties and morphology of compatibilized nylon/acrylonitrile-butadiene-styrene blendsPolymer, 1994
- Mechanical properties and morphology of nylon-6/acrylonitrile-butadiene-styrene blends compatibilized with imidized acrylic polymersPolymer, 1994
- Structure and properties of compatibilized blends of polyamide‐6 and ABSJournal of Applied Polymer Science, 1993
- Reactive compatibilization of blends of nylon 6 and ABS materialsPolymer, 1991